Cerca
Filters
Close

DAQe-2204

64-CH 12-Bit 3 MS/s Multi-Function PCI Express® DAQ Card
Caratteristiche
  • x1 lane PCI Express Interface
  • 64-CH single-ended or 32-CH differential analog inputs
  • Onboard 1 k-sample A/D FIFO
  • Bipolar or unipolar analog input ranges
  • Programmable gains: x1, x2, x4, x5, x8, x10, x20, x40, x50, x200
  • 512-configuration channel gain queue
  • 2-CH 12-bit multiplying analog outputs with waveform generation
Produttore:: Adlink Technology Inc.

ANALOG INPUT
 Resolution: 12 bits, no missing codes
 Number of channels: 64 single-ended or 32 differential (software selectable per channel)
 Channel gain queue size: 512
 Maximum sampling rate: 3 MS/s
 Programmable gain: 1, 2, 4, 5, 8, 10, 20, 40, 50, 200
 Bipolar input ranges: Max. : ±10 V, Min. : ±0.05 V
 Unipolar input ranges: Max. : 0-10 V, Min. : 0-0.1 V
 Offset error: ±1 mV
 Gain error: ±0.03% of FSR
 Input coupling: DC
 Overvoltage protection: Power on: Continuous ±30 V, Power off: Continuous ±15 V
 Input impedance: 1 GΩ/100 pF
 CMRR (gain = 1): 90 dB
 Settling time: 1 µs to 0.1% error *
 -3dB small signal bandwidth (gain = 1): 2 MHz
 Trigger sources: Software, external digital/analog trigger, SSI bus
 Trigger modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
 FIFO buffer size: 1 k samples
 Data transfers: Polling, scatter-gather DMA

ANALOG OUTPUT
 Number of channels: 2 voltage outputs
 Resolution: 12 bits
 Output ranges: 0-10 V, ±10 V, 0-AOEXTREF, ±AOEXTREF
 Maximum update rate: 1 µs
 Slew rate: 20 V/µs
 Settling time: 3 µs to ±0.5 LSB accuracy
 Offset error: ±1 mV
 Gain error: ±0.02 % of max. output
 Driving capacity: ±5 mA
 Stability: Any passive load, up to 1500 pF
 Trigger sources: Software, external digital/analog trigger, SSI bus
 Trigger modes: Post-trigger, delay-trigger, and repeated trigger
 FIFO buffer size: 1 k samples
 Data transfers: Programmed I/O, scatter-gather DMA

DIGITAL I/O
 Number of channels: 24-CH 8255 programmable input/output
 Compatibility: 5 V/TTL
 Data transfers: Programmed I/O

General-Purpose Timer/Counter
 Number of channels: 2
 Resolution: 16 bit
 Compatibility: 5V/TTL
 Base clock available: 40 MHz, external clock up to 10 MHz

Auto Calibration
 On-board reference: +5 V
 Temperature drift: ±2 ppm/°C
 Stability: ±6 ppm/1000 Hrs

General Specifications
 Dimensions: 168 mm x 107 mm (not including connectors)
 Connector: 68-pin VHDCI female x 2
 Operating temperature: 0 to 55°C
 Storage temperature: -20 to 70°C
 Humidity: 5 to 95 %, noncondensing
 Power requirements: +3.3 V 0.9 A, +12 V 0.564 A typical

ANALOG INPUT
 Resolution: 12 bits, no missing codes
 Number of channels: 64 single-ended or 32 differential (software selectable per channel)
 Channel gain queue size: 512
 Maximum sampling rate: 3 MS/s
 Programmable gain: 1, 2, 4, 5, 8, 10, 20, 40, 50, 200
 Bipolar input ranges: Max. : ±10 V, Min. : ±0.05 V
 Unipolar input ranges: Max. : 0-10 V, Min. : 0-0.1 V
 Offset error: ±1 mV
 Gain error: ±0.03% of FSR
 Input coupling: DC
 Overvoltage protection: Power on: Continuous ±30 V, Power off: Continuous ±15 V
 Input impedance: 1 GΩ/100 pF
 CMRR (gain = 1): 90 dB
 Settling time: 1 µs to 0.1% error *
 -3dB small signal bandwidth (gain = 1): 2 MHz
 Trigger sources: Software, external digital/analog trigger, SSI bus
 Trigger modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
 FIFO buffer size: 1 k samples
 Data transfers: Polling, scatter-gather DMA

ANALOG OUTPUT
 Number of channels: 2 voltage outputs
 Resolution: 12 bits
 Output ranges: 0-10 V, ±10 V, 0-AOEXTREF, ±AOEXTREF
 Maximum update rate: 1 µs
 Slew rate: 20 V/µs
 Settling time: 3 µs to ±0.5 LSB accuracy
 Offset error: ±1 mV
 Gain error: ±0.02 % of max. output
 Driving capacity: ±5 mA
 Stability: Any passive load, up to 1500 pF
 Trigger sources: Software, external digital/analog trigger, SSI bus
 Trigger modes: Post-trigger, delay-trigger, and repeated trigger
 FIFO buffer size: 1 k samples
 Data transfers: Programmed I/O, scatter-gather DMA

DIGITAL I/O
 Number of channels: 24-CH 8255 programmable input/output
 Compatibility: 5 V/TTL
 Data transfers: Programmed I/O

General-Purpose Timer/Counter
 Number of channels: 2
 Resolution: 16 bit
 Compatibility: 5V/TTL
 Base clock available: 40 MHz, external clock up to 10 MHz

Auto Calibration
 On-board reference: +5 V
 Temperature drift: ±2 ppm/°C
 Stability: ±6 ppm/1000 Hrs

General Specifications
 Dimensions: 168 mm x 107 mm (not including connectors)
 Connector: 68-pin VHDCI female x 2
 Operating temperature: 0 to 55°C
 Storage temperature: -20 to 70°C
 Humidity: 5 to 95 %, noncondensing
 Power requirements: +3.3 V 0.9 A, +12 V 0.564 A typical