|
Technology
|
|
|
Standard
|
IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3u 100Base-FX
IEEE 802.3x Flow Control and Back Pressure
|
|
Performance
|
|
|
Forwarding Technology
|
Supports 4 types of forwarding mode, store and forward, modify cut-through, pure converter and converter with auto-change mode. This feature is selected by DIP-switch.
|
|
Link Lose Forward
|
Supports Bi-directional Link Loss Forwarding function
|
|
Forwarding Latency
|
Store and Forward: 250 x 10-6S Modify Cut-Through: 17 x 10-6S Converter : 1.6 x 10-6S
|
|
TX Auto Sensing/ Forced
|
RJ-45 port supports auto-negotiation and forced mode – 100Mbps/Full Duplex.
|
|
Packet Length
|
64~1600Bytes @ Pure-Converter mode.
|
|
IEEE 802.3x flow control /back-pressure
|
Enabled by DIP Switch
|
|
Event Alarm
|
Supports port link down and power event alarm relay output, controlled by DIP switch.
|
|
Digital Output
|
Dry Relay Output with 1A @24V DC ability
|
|
Interface
|
|
|
Ethernet Port – RJ-45
|
10/100TX ports with Auto MDI/MDI-X, Auto Negotiation.
|
|
Ethernet Port – Fiber
|
100Mbps Fiber port, SC
JetCon 2301S-m/JetCon 2301S-mw: 2KM (Max.)
- Wave-length: 1310nm
- Min TX Power:-19dBm
- Max TX Power:-14dBm
- Min RX Sensitivity:-14dBm
- Max RX Sensitivity:-31dBm
- Link budget:12dB
JetCon 2301S-s/JetCon 2301S-sw: 30KM (Max.)
- Wave-length:1310nm
- Max TX Power:-8dBm
- Min TX Power:-15dBm
- Max RX Sensitivity:-34dBm
- Min RX Sensitivity:-8dBm
- Link budget: 19dB
JetCon 2301-s (WDM-A): Single-mode: 30KM (Max.)
- Wave-length: TX 1310nm, RX 1550nm
- Min TX Power:-14dBm
- Max TX Power:-8dBm
- Min RX Sensitivity: 0 dBm
- Max RX Sensitivity:-31dBm
- Link budget:17dBm
JetCon 2301-s (WDM-B ): Single-mode: 30KM (Max.)
- Wave-length:TX 1550nm, RX 1310nm
- Max TX Power:-14dBm
- Min TX Power:-8dBm
- Max RX Sensitivity: 0 dBm
- Min RX Sensitivity:-31dBm
- Link budget: 17dBm
|
|
Ethernet Copper Cable
|
RJ-45 Ethernet port : 100 Meters
10Base-T: 2-pairs UTP/STP Cat-3,4 TIA/EIA 568-B cable 100Base-TX : 2/4 pairs UTP/STP Cat.5 TIA/EIA 568-B cable
|
|
Ethernet Fiber Cable
|
JetCon 2301S-m: 2KM distance, 50~62.5/125um Multi-mode fiber Cable. JetCon 2301S-s: 30KM distance,8~10/125um Single-mode fiber cable.
|
|
Diagnostic LEDs
|
- System Power (Green on) : Power 1 , 2
- Relay Alarm: Active (Red)
- Link Loss Forwarding : Far end fault event occurred (Red on)
- Op. Mode: Convert (Green on) (Controlled by DIP Switch 4)
- Fiber Ethernet Port: Link/Activity (Green on/Blinking), Full Duplex/Collision (Yellow on/Yellow Blinking)
- Ethernet Port: Link/Activity (Green on/Blinking), Full Duplex/Collision ( Yellow On/ Yellow Blinking)
|
|
DIP Switch
|
DIP Switch 1: LLF Enable/Disable, default disable (DIP 1 off)
DIP Switch 2: TX port Auto-Negotiation (OFF)/Force_100F (ON), default disable (DIP 2 off) DIP Switch 3 & 4: Forwarding Mode Selection, default store & forward mode (DIP 3,4 off) DIP Switch 5: Power Alarm, default disable (DIP 5 off)
DIP Switch 6: Port Alarm, default disable (DIP 6 off) DIP Switch 7: Flow Control, default enable (DIP 7 off)
|
|
Power Connector
|
Removable Terminal Block
|
|
Digital Output
|
Removable Terminal Block
|
|
Power Requirement
|
|
|
Power
|
Redundant Power DC 10~60V with polarity reverses correction. Supports Positive/Negative power system
|
|
Power Consumption
|
5 Watts / DC 24V
|
|
Mechanical
|
|
|
Enclosure Protection
|
Ingress Protection code – 31
|
|
Mounting
|
DIN Rail installation
|
|
Dimension
|
99(D) x30(W)x 120(H) mm (Without Din-rail kit)
|
|
Weight
|
400g Without package
|
|
Environmental
|
|
|
Operating Temperature
|
-40℃~75℃
|
|
Operating Humidity
|
0% ~ 95% non-condensing
|
|
Storage Temperature
|
-40℃~85℃
|
|
Storage Humidity
|
0%~ 95% non-condensing
|
|
Approvals
|
|
|
EMI
|
EN55022 CLASS A, IEC/EN 61000-6-4
|
|
EMS
|
CE/ EN 55024, IEC/EN 61000-6-2, IEC/EN 61000-4-2, IEC/EN 61000-4-3, IEC/EN 61000-4-4,
IEC/EN 61000-4-5, IEC/EN61000-4-6, IEC/EN 61000-4-8, IEC/EN 61000-4-9,IEC 61000-4-11
|
|
Railway
|
EN50121-4
|
|
Safety
|
Hi-pot Testing – AC 1.5KV
|
|
Warranty
|
5 years
|
|
Ordering Information
|
|
|
JetCon 2301S-s
|
Industrial Fast Ethernet to Fiber Rail Media Converter in Slim Case, SC, Single-mode/30KM,
-25~75℃
|
|
JetCon 2301S-m
|
Industrial Fast Ethernet to Fiber Rail Media Converter in Slim Case, SC, Multi-Mode/2KM,
-25~75℃
|
|
JetCon 2301S-sw
|
Industrial Fast Ethernet to Fiber Rail Media Converter in Slim Case, SC, Single-mode/30KM,
-40~75℃
|
|
JetCon 2301S-mw
|
Industrial Fast Ethernet to Fiber Rail Media Converter in Slim Case, SC, Multi-Mode/2KM,
-40~75℃
|
|
JetCon 2301S-s WDM-A
|
Industrial Fast Ethernet to Fiber Rail Media Converter in Slim Case, Single-mode/30KM, WDM A Tx1310/Rx1550
|
|
JetCon 2301S-s WDM-B
|
Industrial Fast Ethernet to Fiber Rail Media Converter in Slim Case, Single-mode/30KM,
WDM B Tx1550/Rx1310
|
|
Includes
|
- JetCon 2301S with DIN Rail Clip *1
- Quick Installation Guide * 1
|
