ANALOG INPUT
Number of channel: 32 single-ended or 16 differential
Resolution: 16 bits
Conversion time: 3.5µs
Maximum sampling rate: 250 kS/s
Input signal ranges: (software programmable)
| Gain |
Input range |
| 1 |
±10 V |
| 10 |
1 V |
| 100 |
±0.1 V |
Accuracy
| Gain |
Accuracy |
| 1, 10 |
0.01% of FSR ± 1 LSB |
| 100 |
0.02% of FSR ± 1 LSB |
Input coupling: DC
Overvoltage protection: continuous ±35V
Input impendance: 1GO
Trigger modes: software, pacer, and external trigger (5 V/TLL compatible)
FIFO buffer size: 1k samples
Data transfer: polling, interrupt
ISOLATED DIGITAL INPUT
Number of channel: 16
Maximum input range: 24v, non polarity
Digital logic levels:
- 0-24 V, non-polarity
- Input high voltage: 5-24 V
- Input low voltage: 0-1.5 V
Input resistance: 2.4 kO @ 0.5 W
Isolation voltage: 2500 VRMS
Data transfers: programmed I/O
ISOLATED DIGITAL OUTPUT
Number of channel: 16
Output type: open emitter Darlington transistors
Sink current:
- 350 mA for one channel @ 100% duty
- 260 mA for all channels @ 10% duty
Power dissipation: Max. 1.47 W per chip (8 DO channels)
Supply voltage: 5-35 V
Isolation voltage: 2500 VRMS
Data transfers: programmed I/O
POWER OUTPUT
Output voltage: +12 V and -12 V
Resettable fuse protection: 500 mA
GENERAL-PURPOSE TIMER/COUNTER
Number of channels: 1
Resolution: 16 bits
Compatibility: 5 V/TTL
Base clock available: 2 MHz, external clock to 2MHz
GENERAL SPECIFICATION
I/O Connector:
- 37-pin D-sub female
- 20-pin ribbon male x 2
Operating temperature: 0 to 55°C
Storage temperature: -20 to 80°C
Relative humidity: 5 to 95%, noncondensing
Power requirements: +5V 600 mA typical, +12V 100mA typical
Dimensions (not including connectors): 175 x 107 mm
