Cerca
Filters
Close

ACL-8111

8-CH, 12-Bit, 50 kS/s Low Cost Multi-Function DAQ Card
Caratteristiche
  • 12-bit A/D resolution
  • Up to 50 kS/s sampling rate
  • 8-CH single-ended inputs
  • Programmable gains of x1, x2, x4, x8, x16
  • Bipolar analog input ranges
  • 1-CH 12-bit monolithic multiplying analog output
  • 16-CH TTL digital inputs and 16-CH TTL digital outputs
  • 3 Programmable A/D trigger modes
Produttore:: Adlink Technology Inc.
ANALOG INPUT
Number of channels:8 single-ended
Resolution: 12 bits
Conversion time: 8 µs
Maximum sampling rate: 50 kS/s
Input signal ranges (software programmable):
Gain Input Range
1 ± 1 V
2 ± 2.5 V
4 ± 1.25 V
8 ± 0.625 V
16 ± 0.3125 V

Accuracy: 0.015% of  FSR ± 1 LSB
Input coupling: DC
Overvoltage protection: continuous ±35 V
Input impendance: 1 GO
Trigger models: software, pacer, and external trigger
Data transfers: polling, interrupt
IRQ level: programmable IRQ 2, 3, 4, 5, 6, 7

ANALOG OUTPUT
Number of channels: 1 voltage outputs
Resolution: 12 bits
Output ranges: 0-5 V, 0-10 V
Output driving capacity: 5  mA max
Setting Time: 30µs
Data Transfer: programmed I/O

DIGITAL I/O
Number of channels: 16 inputs and 16 outputs
Compatibility: 5 V/TTL
Data transfer: programmed I/O

GENERAL SPECIFICATION
I/O connector:
    - 37-pin D-sub female
    - 20-pin ribbon male x 2
Operating temperature: 0 to 55° C
Storage Temperature: -20 to 80° C
Relative humidity: 5 to 95%, non condensing
Power requirements: +5V 440 mA typical, +12V 60mA typical
Dimension
(not including connectors): 158 x 108 mm
I/O base address: 16 consecutive address location
ANALOG INPUT
Number of channels:8 single-ended
Resolution: 12 bits
Conversion time: 8 µs
Maximum sampling rate: 50 kS/s
Input signal ranges (software programmable):
Gain Input Range
1 ± 1 V
2 ± 2.5 V
4 ± 1.25 V
8 ± 0.625 V
16 ± 0.3125 V

Accuracy: 0.015% of  FSR ± 1 LSB
Input coupling: DC
Overvoltage protection: continuous ±35 V
Input impendance: 1 GO
Trigger models: software, pacer, and external trigger
Data transfers: polling, interrupt
IRQ level: programmable IRQ 2, 3, 4, 5, 6, 7

ANALOG OUTPUT
Number of channels: 1 voltage outputs
Resolution: 12 bits
Output ranges: 0-5 V, 0-10 V
Output driving capacity: 5  mA max
Setting Time: 30µs
Data Transfer: programmed I/O

DIGITAL I/O
Number of channels: 16 inputs and 16 outputs
Compatibility: 5 V/TTL
Data transfer: programmed I/O

GENERAL SPECIFICATION
I/O connector:
    - 37-pin D-sub female
    - 20-pin ribbon male x 2
Operating temperature: 0 to 55° C
Storage Temperature: -20 to 80° C
Relative humidity: 5 to 95%, non condensing
Power requirements: +5V 440 mA typical, +12V 60mA typical
Dimension
(not including connectors): 158 x 108 mm
I/O base address: 16 consecutive address location