Cerca
Filters
Close

VDX-6324RD

Scheda CPU industriale half size ISA con processore DM&P Vortex86DX 800 MHz
256MB / 4S / 4USB / VGA / LCD / LAN / GPIO / CF / PWM x16
Caratteristiche
  • DM&P SoC CPU Vortex86DX- 800MHz
  • PC/104 standard compliant, PCI-104 (Optional)
  • 256/512MB DDR2 onboard
  • Watchdog Timer, software programmable from 30.5 µsec. to 512 sec
  • XGI Volari Z9s Chipset, onboard 32MB VGA Memory
  • Integrated 10/100Mbps Ethernet
  • Onboard 4MB SPI Flash Disk
  • Support Compact Flash Type I/II
  • Support MSTI EmbedDisk Module
  • 44-pin IDE to microSD (Optional)
  • Operation Temperature: -20°C ~ +70°C, -40°C ~ +85°C (Optional)
Produttore:: ICOP Technology Inc.

 SoC
DM&P SoC CPU Vortex86DX- 800MHz
Real Time Clock with Lithium Battery Backup
Cache L1:16K I-Cache, 16K D-Cache, L2 Cache 128 KB
Bus PC/104 standard compliant, PCI-104 (Optional)
BIOS AMI BIOS
System Memory 256/512MB DDR2 Onboard
Watchdog Timer
Software programmable from 30.5μ sec.to 512 sec. x 2 sets (Watchdog 1 fully compatible with M6117D)
VGA
XGI Volari Z9s Chipset
VGA and TFT Flat Panel Interface Support
Onboard 32MB VGA Memory, support resolution up to 1280 x 1024, 16M colors
LAN Integrated 10/100Mbps Ethernet
Audio CM119 USB Audio Controller (Optional)
Flash Disk Support
Onboard 4MB SPI Flash Disk
MSTI EmbedDisk Module (16MB and above)
Compact Flash Type I/II
44-pin IDE to Micro SD (Optional)
PWM 16~24 Channels
SRAM support 512KB (Optional)
I/O Interface
Enhanced IDE port (UltraDMA-100/66/33) x1
RS-232 port x3
RS-232/422/485 port x1
USB port (Ver2.0) x4
Parallel port x1
16-bit GPIO port x1
10/100Mbps Ethernet port x1
Connectors
2.0mm 44-pin box header for IDE x1
2.0mm 44-pin box header for LCD x1
2.54mm 26-pin box header for Printer x1
2.54mm 20-pin box header for 16-bit GPIO x1
2.54mm 10-pin box header for RS-232 x3
2.54mm 10-pin box header for USB x2
2.54mm 4-pin header for -5V, -12V, +12V, GND x1
2.54mm 3-pin header for RS-485 x1
2.54mm 2-pin header for Reset x1
2.54mm 7-pin header for Redundancy Signal x1 (Optional)
2.54mm 2-pin header for System-Fail-SW x1 (Optional)
1.25mm 6-pin wafer for JTAG x1
1.25mm 4-pin wafer for Line-out/MIC-in x2 (Optional)
4-pin male power connector x1
External 15-pin D-Sub female connector for VGA x1
External 9-pin D-Sub male connector for RS-232 x1
External RJ-45 connector for Ethernet x1
External Mini DIN connector for Keyboard/Mouse x1
Type I/II Compact Flash Slot x1
Power Requirement Single Voltage +5V @ 700mA
Weight 180g
Board Size 184 x 122mm (7.24 x 4.80 inches)
Operating Temperature -20 °C ~ +70 °C / -40 °C ~ +85 °C (Optional)

 SoC
DM&P SoC CPU Vortex86DX- 800MHz
Real Time Clock with Lithium Battery Backup
Cache L1:16K I-Cache, 16K D-Cache, L2 Cache 128 KB
Bus PC/104 standard compliant, PCI-104 (Optional)
BIOS AMI BIOS
System Memory 256/512MB DDR2 Onboard
Watchdog Timer
Software programmable from 30.5μ sec.to 512 sec. x 2 sets (Watchdog 1 fully compatible with M6117D)
VGA
XGI Volari Z9s Chipset
VGA and TFT Flat Panel Interface Support
Onboard 32MB VGA Memory, support resolution up to 1280 x 1024, 16M colors
LAN Integrated 10/100Mbps Ethernet
Audio CM119 USB Audio Controller (Optional)
Flash Disk Support
Onboard 4MB SPI Flash Disk
MSTI EmbedDisk Module (16MB and above)
Compact Flash Type I/II
44-pin IDE to Micro SD (Optional)
PWM 16~24 Channels
SRAM support 512KB (Optional)
I/O Interface
Enhanced IDE port (UltraDMA-100/66/33) x1
RS-232 port x3
RS-232/422/485 port x1
USB port (Ver2.0) x4
Parallel port x1
16-bit GPIO port x1
10/100Mbps Ethernet port x1
Connectors
2.0mm 44-pin box header for IDE x1
2.0mm 44-pin box header for LCD x1
2.54mm 26-pin box header for Printer x1
2.54mm 20-pin box header for 16-bit GPIO x1
2.54mm 10-pin box header for RS-232 x3
2.54mm 10-pin box header for USB x2
2.54mm 4-pin header for -5V, -12V, +12V, GND x1
2.54mm 3-pin header for RS-485 x1
2.54mm 2-pin header for Reset x1
2.54mm 7-pin header for Redundancy Signal x1 (Optional)
2.54mm 2-pin header for System-Fail-SW x1 (Optional)
1.25mm 6-pin wafer for JTAG x1
1.25mm 4-pin wafer for Line-out/MIC-in x2 (Optional)
4-pin male power connector x1
External 15-pin D-Sub female connector for VGA x1
External 9-pin D-Sub male connector for RS-232 x1
External RJ-45 connector for Ethernet x1
External Mini DIN connector for Keyboard/Mouse x1
Type I/II Compact Flash Slot x1
Power Requirement Single Voltage +5V @ 700mA
Weight 180g
Board Size 184 x 122mm (7.24 x 4.80 inches)
Operating Temperature -20 °C ~ +70 °C / -40 °C ~ +85 °C (Optional)