Cerca
Filters
Close

TQMP1020-2020

Power Architecture module with NXP QorIQ™
Caratteristiche
  • Easiest migration of PowerQUICC III on QorIQ™ by approved e500v2 core
  • Single (P2010)- and MultiCores (P2020) of 400 up to 2x 1200 MHz
  • 45nm SOI for best Performance/Watt ratio
  • 3x Gigabit Ethernet, 3x PCIe and one USB 2.0 interface
  • Simple function extension via PCIe, SPI, I²C and flexible local bus
Produttore:: TQ Group GmbH
Microprocessor
Module Model
TQMP-1020
TQMP-2020
CPU frequency:
up to 800 MHz
up to 1200 MHz
Microprocessor:
Dual (P1020/P1021/2020) or single (P1011/P1012/P2010)
high-performance Power Architecture e500v2 cores

Memory
EEPROM:
32 KByte
NOR-Flash:
128 MB
SDHC:
1x supports to boot from the flash card
SDRAM:
up to 4 GB
up to 8 GB

Interfaces
Gigabit Ethernet:
3x with Jumbo Frame Support, IP checksums calculation and IEEE1588v2 support
I²C:
2x, max. 400 kHz
RS232:
DUART, max. 115 kBaud
SPI:
1x
USB:
1x USB 2.0 HOST with ULPI interface

Other Interfaces and Busses
Debugging:
JTAG Interface
GPIO:
Up to 16
Local bus frequency:
16 bit enhanced / up to 66 MHz
PCIe:
2x 1.0a controller up to 2.5 Gbit/s
3x (2x) 1.0a controller up to 2,5 Gbit/s
TDM:
Yes
-
RapidIO
-
up to 2x serial
with integrated message unit up to 3,125 Gbit/s

General
Dimensions:
74mm x 54mm
Power consumption:
typ. 3,5 up to 5 W
typ. 5 up to 7 W
Pin number:
360
Plug system:
0.8mm
RoHS:
Yes
RTC:
Yes
Power supply:
3,3 V
Temperature range:
0°C ... +70°C
Temperature range, extended:
-40°C ... +85°C
Availability:
In Production
Watchdog:
Yes

Operating Systems / User Interface
Operating systems:
Linux, QNX
Operating systems on request:
VxWorks
Microprocessor
Module Model
TQMP-1020
TQMP-2020
CPU frequency:
up to 800 MHz
up to 1200 MHz
Microprocessor:
Dual (P1020/P1021/2020) or single (P1011/P1012/P2010)
high-performance Power Architecture e500v2 cores

Memory
EEPROM:
32 KByte
NOR-Flash:
128 MB
SDHC:
1x supports to boot from the flash card
SDRAM:
up to 4 GB
up to 8 GB

Interfaces
Gigabit Ethernet:
3x with Jumbo Frame Support, IP checksums calculation and IEEE1588v2 support
I²C:
2x, max. 400 kHz
RS232:
DUART, max. 115 kBaud
SPI:
1x
USB:
1x USB 2.0 HOST with ULPI interface

Other Interfaces and Busses
Debugging:
JTAG Interface
GPIO:
Up to 16
Local bus frequency:
16 bit enhanced / up to 66 MHz
PCIe:
2x 1.0a controller up to 2.5 Gbit/s
3x (2x) 1.0a controller up to 2,5 Gbit/s
TDM:
Yes
-
RapidIO
-
up to 2x serial
with integrated message unit up to 3,125 Gbit/s

General
Dimensions:
74mm x 54mm
Power consumption:
typ. 3,5 up to 5 W
typ. 5 up to 7 W
Pin number:
360
Plug system:
0.8mm
RoHS:
Yes
RTC:
Yes
Power supply:
3,3 V
Temperature range:
0°C ... +70°C
Temperature range, extended:
-40°C ... +85°C
Availability:
In Production
Watchdog:
Yes

Operating Systems / User Interface
Operating systems:
Linux, QNX
Operating systems on request:
VxWorks
Specifiche di prodotto
Famiglia CPU NXP QorIQ P1020 e P2020
Form Factor Proprietario
Specifiche di prodotto
Famiglia CPU NXP QorIQ P1020 e P2020
Form Factor Proprietario