ANALOG INPUT
Resolution: 16 Bit
Number of channels: 32 SE/ 16 DIFF
Maximum sampling rate (single channel): 500 kS/s
Programmable Gain: 1, 2, 4, 5, 8, 10, 20, 40
Input Range: ±10 V, ±5 V, ±2.5 V, ±2 V, ±1.25 V, ±1 V, ±500 mV, ±250 mV
Offset Error: ±2.6 mV typical, before calibration, ±0.5 mV typical, after calibration
Gain Error: ±0.2% of FSR, before calibration, ±0.015% of FSR, after calibration
-3dB Small Signal Bandwidth (Gain=1): 1.5 MHz
System noise (Gain=1): 0.5 mVRMS
CMRR (Gain=1): 93.5 dB
SFDR (Spurious-free dynamic range, Gain=1): 88 dB
SINAD (Signal-to-Noise and Distortion Ratio, Gain=1): 84 dB
THD (Total Harmonic distortion, Gain=1): -90 dB
SNR (Signal-to-Noise Ratio, Gain=1): 86 dB
ENOB (Gain=1) 13.5 bits
FIFO Buffer size: 1 k samples
Trigger Sources: Software, external digital, SSI
Trigger Mode: Post trigger, retrigger, gate trigger
External conversion source: Yes (up to 500 kS/s)
Input Coupling: DC
Over voltage protection: Continuous ±30 V
Input impedance: High Impedance > 1GO
Data Transfer: Programmed I/O, Interrupt, Bus Mastering DMA
ANALOG OUTPUT
N° of channels: 2 voltage outputs
Resolution: 16-bit
Max Update Rate: 1 MHz (simultaneous update)
FIFO: 512
Output Range: ±10 V
Output Driving capacity: ±5 mA
Slew Rate: 20 V/µs
Setting Time (0.1% of full scale) 2.6 µs
Offset Error: ±0.1 mV
Gain error: ±0.1 mV
Rising time: 0.67 µs
Falling Time: 0.705 µs
FUNCTION I/O
Mode: Digital I/O, General Timer/Counter, Pulse generation
Digital I/O: 16 DO (3.3 V TTL Level) / 16 DI (3.3 V or 5 V TTL Level)
General Timer/Counter: Four 32-bit, Base clock: 80 MHz, external to 10 MHz
Pulse generation: Four PWM outputs (Modulation frequency: 0.01 Hz to 5 MHz; Duty cycle: 1%-99%)
ENCODER INPUT
N° of channels: 2(2)
Encoder Type: CW/CCW encoder, x 1 AB phase encoder, x 2 AB phase encoder, x 4 AB phase encoder
GENERAL SPECIFICATIONS
PCI Bus: 5 V and 3.3 V universal PCI bus
Auto-calibration: Yes
I/O connector: Two 68-pin SCSI-VHDCI female
Operation Temperature: 0 to 55°C
Storage Temperature: -20 to 70°C
Humidity: 5 to 95% non-condensing
Power Requirements:
+5 V 1.2 A typical
+12 V 760 mA typical
-12 V 50 mA typical
Dimensions: 175 mm x 107 mm (not including connectors)
