|
Technology
|
|
|
|
IEEE802.3 10Base-T,
IEEE802.3u 100Base-TX,
IEEE802.3u 100Base-FX,
IEEE802.3x Flow Control and Back-Pressure
|
|
|
|
|
Support Switch mode and Pure Converter mode. This feature is select by DIP-switch.
The Switch mode will begin to forward the received data only after it received the frame completely, the forwarding latency depends on the packet length and the packet length support 64 to 1600Bytes. The pure converter operating algorithm is different with switch mode; it will direct transfer Ethernet signal without any frame checking
|
|
|
Link Loss Forwarding Technology
|
|
|
Enabled/Disabled by DIP-Switch 1
|
|
|
|
|
Passed AC1.5KV Hi-pot tesing on port-port, power-case and port-power
|
|
|
Interface
|
|
|
|
1 x 10/100 Base-TX with Auto MDI/ MDI-X, Auto-Negotiation functions
1 x 100Base-FX
|
|
|
|
|
10/100 Base-TX: RJ-45
100Base-FX: Duplex SC for multi-mode or single-mode fiber
Power: 2-Pin Terminal Block
|
|
|
|
|
RJ-45 connector:
supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The link distance is maximum 100 meters
Fast Ethernet Fiber Transceiver:
SC connector: supports multi-mode or single-mode optical fiber
Multi-mode fiber: 50/125um or 62.5/125um, max. distance 2KM
Single-mode fiber: 8/125um, 9/125um or 10/125 um, max distance 30KM
|
|
|
|
|
JetCon1301-m, Multi-mode: 2KM (Max.)
Wave-length: 1310nm
Min TX Power:-19dBm
Max TX Power:-14dBm
Max RX Sensitivity:-30dBm
Link budget:11dBm
JetCon1301-s, Single-mode: 30KM (Max.)
Wave-length:1310nm
Max TX Power:-8dBm
Min TX Power:-15dBm
Max RX Sensitivity:-34dBm
Link budget: 19dBm
JetCon1301-s(WDM-A), Single-mode: 30KM (Max.)
Wave-length: TX 1310nm, RX 1550nm
Max TX Power:-3dBm
Min TX Power:-9dBm
Max RX Sensitivity:-31dBm
Link budget: 22dBm
JetCon1301-s(WDM-B), Single-mode: 30KM (Max.)
Wave-length: TX 1550nm, RX 1310nm
Max TX Power:-3dBm
Min TX Power:-9dBm
Max RX Sensitivity:-31dBm
Link budget: 22dBm
JetCon1301-m(48V), Multi-mode: 2KM (Max.)
Wave-length: 1310nm
Min TX Power:-19dBm
Max TX Power:-14dBm
Max RX Sensitivity:-30dBm
Link budget:11dBm
JetCon1301-s(48V), Single-mode: 30KM (Max.)
Wave-length:1310nm
Max TX Power:-8dBm
Min TX Power:-15dBm
Max RX Sensitivity:-34dBm
Link budget: 19dBm
|
|
|
|
|
DIP 1: Link loose forwarding Enable /Disable.
DIP 2: RJ-45 Auto-Negotiation/Forced 100Mbps Full Duplex
DIP 3: Fiber Full Duplex/Half Duplex
DIP 4: Switch/Pure Converter mode.
|
|
|
|
|
System: Power (Green)
RJ-45 port: Link (Green ON)/Activity (Green Blinking)
Fiber port: Link (Green ON)/Activity (Green Blinking)
|
|
|
Power Requirements
|
|
|
|
2 pins terminal block for power input with auto polarity reverse.
JetCon1301: DC 24V (18~32V) /AC 18~27V, 47~63Hz
JetCon1301-48V: DC 48V (36~60V)
|
|
|
|
|
JetCon1301: 3.5 Watts@ DC 24V(Maximum)
JetCon1301-48V: 4 Watts@ DC 48V(Maximum)
|
|
|
Mechanical
|
|
|
|
|
|
|
Aluminum metal case with IP31 grade case protection for drop-waterproof and dustproof
|
|
|
|
|
70mm(H) x 30mm (W) x 89mm (D) ( with DIN rail clip)
70mm(H) x 30mm (W) x 80mm (D) ( without DIN rail clip)
|
|
|
|
|
374g with package
292g without package
|
|
|
Environmental
|
|
|
|
-10 to 70°C (JetCon 1301-w/1301-w(48V): -40~80°C)
|
|
|
|
|
0% to 95% (Non-condensing)
|
|
|
|
|
|
|
|
|
Regulatory Approvals
|
|
|
|
AC1.5KV on port to port and port to power
|
|
|
|
|
|
|
|
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
|
|
|
|
|
|
|
|
|
|
|
|
|
|
506,819 Hours, MIL-HDBK-217F GB standard
|
|
|
|
|
