Cerca
Filters
Close

PCI-7248

24-CH Opto-22 Compatible DIO Cards
Caratteristiche
  • Supports a 32-bit 5 V PCI bus
  • 48-CH digital TTL/DTL inputs/outputs
  • Emulates 4/2/1 industry standard 8255 PPI (mode 0)
  • Support Windows 7/8 X64/X86 and Windows 2008 R2
  • Output port status read back
  • On board 8254 timer/counter chip
  • Programmable interrupt source
  • 12V and 5V power supply to OPTO-22 (Direct interface with OPTO-22)
Produttore:: Adlink Technology Inc.

DIGITAL I/O
Number of channel: 48 inputs/outputs
Compatibility: 5 V/TTL
Digital Logic Levels
    - Input high voltage: 2-5.25 V
    - Input low voltage: 0-0.8 V
    - Output high voltage: 2.4 V minimum
    - Output low voltage: 0.5 V maximum
Output driving capacity:
    -
Source current: 2.6 mA
    - Sink current: 24 mA
Data transfers: programmed I/O

GENERAL SPECIFICATIONS
I/O connector: 50-pin ribbon male x 2
Operating temperature: 0 to 60°C
Storage temperature: -20 to 80°C
Relative humidity: 5 to 95%, noncondensing
Power requirements: +5V 500 mA typical
Dimensions (not including connectors): 148 x 102 mm

DIGITAL I/O
Number of channel: 48 inputs/outputs
Compatibility: 5 V/TTL
Digital Logic Levels
    - Input high voltage: 2-5.25 V
    - Input low voltage: 0-0.8 V
    - Output high voltage: 2.4 V minimum
    - Output low voltage: 0.5 V maximum
Output driving capacity:
    -
Source current: 2.6 mA
    - Sink current: 24 mA
Data transfers: programmed I/O

GENERAL SPECIFICATIONS
I/O connector: 50-pin ribbon male x 2
Operating temperature: 0 to 60°C
Storage temperature: -20 to 80°C
Relative humidity: 5 to 95%, noncondensing
Power requirements: +5V 500 mA typical
Dimensions (not including connectors): 148 x 102 mm