Cerca
Filters
Close

JetCon-1302

Convertitore industriale da 2 porte Ethernet a fibra ottica multi-mode o single-mode
Caratteristiche
  • Two 10/100 TX ports to One 100FX port
  • Supports Auto MDI/MDI-X, Auto Negotiation
  • Supports Multi-mode 2KM, Single-mode 30KM
  • Fault Relay Output for port alarm
  • Dual modes for power input, AC18-27V/DC18-32V
  • Compact Aluminum case with IP31 grade protection
  • Supports AC1.5KV Hi-Pot isolation protection
  • Operating temperature -10°~70°C
  • Operating temperature -40°~70°C (on request)
Produttore:: Korenix Technology
Technology
Standard
IEEE802.3 10Base-T,
IEEE802.3u 100Base-TX,
IEEE802.3u 100Base-FX,
IEEE802.3x flow control
Switch Technology
Store and forward technology and with 3.2Gbps switch bandwidth

Interface
Number of Ports
2 x 10/100 TX with Auto MDI/MDI-X, Auto-Negotiation functions
1 x 100Base-FX
Connectors
10/100 Base-TX: RJ-45
100Base-FX: Duplex SC
Power / Relay: 4-pin terminal block
Cables
RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The link distance is maximum 100 meters
Fiber Transceiver:
SC Connector:
Multi-mode fiber: 50/125um or 62.5/125um, max. distance 2KM 
Single-mode fiber: 8/125um, 9/125um or 10/125 um, max. distance 30KM
Fiber Transceiver
JetCon1302-m, Multi-mode: 2KM max. distance
Link Distance: 2KM (Max.)
Wave-length: 1310nm
Min Tx Power:-20dBm
Max Tx Power:-14dBm
Min Rx Sensitivity:0dBm
Max Rx Sensitivity:-31dBm
Link budget:11dBm
JetCon1302-s, Single-mode: 30KM max. distance
Link Distance: 30KM (Max.)
Wave-length:1310nm
Min Tx Power:-15dBm
Max Tx Power:-8dBm
Min Rx Sensitivity:0dBm
Max Rx Sensitivity:-34dBm
Link budget:19dBm
Port Alarm DIP Switch
DIP 1~3: Enable or disable port link down 
alarm for copper port 1/2, fiber port 3
On: Enable port link down alarm
Off: Disable port link down alarm
Diagnostic LED
System: Power (green), Fault (red)
RJ-45 port: 100Mbps Link (green on)/Activity(green blinking)
10Mbps Link (yellow on)/Activity(yellow blinking)
Fiber port: Link/Activity(green on / green blinking)

Power Requirements
System Power
2 pins terminal block for power input DC 24V(18~32V)with reverse polarity protection AC 18~27V, 47~63Hz
Power Consumption
4.8Watts @ DC 24V

Mechanical
Installation
DIN-Rail mount
Casing
IP31 protection, aluminum case
Dimensions
111.8mm(H) x 30mm (W) x 98.2mm (D) ( with DIN rail clip)
111.8mm(H) x 30mm (W) x 89.4mm (D) ( without DIN rail clip)
Weight
374g with package
292g without package

Environmental
Operating Temperature
-10 to 70°C (JetCon 1302-w: -40~70°C)
Operating Humidity
0% to 95% (Non-condensing)
Storage Temperature
-40 to 80°C
Storage Humidity
0%~ 95% (Non-condensing)
Hi-Pot
AC1.5KV on port to port and port to power

Regulatory Approvals
EMI
FCC Class A, CE/EN55022 Class A
EMC Immunity Interface
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5
EN61000-4-6, EN61000-4-8, EN61000-4-11
Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
MTBF:
632,171 Hours, MIL-HDBK-217F GB standard
Warranty
5 years
Technology
Standard
IEEE802.3 10Base-T,
IEEE802.3u 100Base-TX,
IEEE802.3u 100Base-FX,
IEEE802.3x flow control
Switch Technology
Store and forward technology and with 3.2Gbps switch bandwidth

Interface
Number of Ports
2 x 10/100 TX with Auto MDI/MDI-X, Auto-Negotiation functions
1 x 100Base-FX
Connectors
10/100 Base-TX: RJ-45
100Base-FX: Duplex SC
Power / Relay: 4-pin terminal block
Cables
RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The link distance is maximum 100 meters
Fiber Transceiver:
SC Connector:
Multi-mode fiber: 50/125um or 62.5/125um, max. distance 2KM 
Single-mode fiber: 8/125um, 9/125um or 10/125 um, max. distance 30KM
Fiber Transceiver
JetCon1302-m, Multi-mode: 2KM max. distance
Link Distance: 2KM (Max.)
Wave-length: 1310nm
Min Tx Power:-20dBm
Max Tx Power:-14dBm
Min Rx Sensitivity:0dBm
Max Rx Sensitivity:-31dBm
Link budget:11dBm
JetCon1302-s, Single-mode: 30KM max. distance
Link Distance: 30KM (Max.)
Wave-length:1310nm
Min Tx Power:-15dBm
Max Tx Power:-8dBm
Min Rx Sensitivity:0dBm
Max Rx Sensitivity:-34dBm
Link budget:19dBm
Port Alarm DIP Switch
DIP 1~3: Enable or disable port link down 
alarm for copper port 1/2, fiber port 3
On: Enable port link down alarm
Off: Disable port link down alarm
Diagnostic LED
System: Power (green), Fault (red)
RJ-45 port: 100Mbps Link (green on)/Activity(green blinking)
10Mbps Link (yellow on)/Activity(yellow blinking)
Fiber port: Link/Activity(green on / green blinking)

Power Requirements
System Power
2 pins terminal block for power input DC 24V(18~32V)with reverse polarity protection AC 18~27V, 47~63Hz
Power Consumption
4.8Watts @ DC 24V

Mechanical
Installation
DIN-Rail mount
Casing
IP31 protection, aluminum case
Dimensions
111.8mm(H) x 30mm (W) x 98.2mm (D) ( with DIN rail clip)
111.8mm(H) x 30mm (W) x 89.4mm (D) ( without DIN rail clip)
Weight
374g with package
292g without package

Environmental
Operating Temperature
-10 to 70°C (JetCon 1302-w: -40~70°C)
Operating Humidity
0% to 95% (Non-condensing)
Storage Temperature
-40 to 80°C
Storage Humidity
0%~ 95% (Non-condensing)
Hi-Pot
AC1.5KV on port to port and port to power

Regulatory Approvals
EMI
FCC Class A, CE/EN55022 Class A
EMC Immunity Interface
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5
EN61000-4-6, EN61000-4-8, EN61000-4-11
Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
MTBF:
632,171 Hours, MIL-HDBK-217F GB standard
Warranty
5 years