Cerca
Filters
Close

PCI-9222

16-CH 16-bit 250 KS/s Multi-Function DAQ Card with Encoder Input
Caratteristiche
  • Recommended for new applications
  • Programmable gains for analog input: ±10V, ±5V, ±2.5V, ±2V, ±1V, ±500mV, ±250mV
  • 2-CH 16-bit simultaneous analog outputs, supporting up to 1 MS/s update rate
  • Programmable function I/O, supporting TTL DIO, 2MHz high-speed DIO, timer/counter, and PWM outputs
  • 2-CH 4 MHz encoder inputs, supporting AB phase, and CW/CCW
  • Dedicated DMA channels for A/D, D/A, and high-speed DIO
  • External digital trigger for A/D, D/A, and high-speed DIO
  • Auto-calibration
Produttore:: Adlink Technology Inc.


ANALOG INPUT
 Resolution: 16 Bit
 Number of channels: 16 SE/ 8 DIFF
 Maximum sampling rate (single channel): 250 kS/s
 Programmable Gain: 1, 2, 4, 5, 8, 10, 20, 40
 Input Range: ±10 V, ±5 V, ±2.5 V, ±2 V, ±1.25 V, ±1 V, ±500 mV, ±250 mV
 Offset Error: ±2.6 mV typical, before calibration, ±0.5 mV typical, after calibration
 Gain Error: ±0.2% of FSR, before calibration, ±0.015% of FSR, after calibration
 -3dB Small Signal Bandwidth (Gain=1): 1.5 MHz
 System noise (Gain=1): 0.5 mVRMS
 CMRR (Gain=1): 93.5 dB
 SFDR (Spurious-free dynamic range, Gain=1): 95 dB
 SINAD (Signal-to-Noise and Distortion Ratio, Gain=1): 86 dB
 THD (Total Harmonic distortion, Gain=1): -94 dB
 SNR (Signal-to-Noise Ratio, Gain=1): 87 dB
 ENOB (Gain=1) 13.9 bits
 FIFO Buffer size: 1 k samples
 Trigger Sources: Software, external digital, SSI
 Trigger Mode: Post trigger, retrigger, gate trigger
 External conversion source: Yes (up to 250 kS/s)
 Input Coupling: DC
 Over voltage protection: Continuous ±30 V
 Input impedance: High Impedance > 1GO
 Data Transfer: Programmed I/O, Interrupt, Bus Mastering DMA

ANALOG OUTPUT
 N° of channels: 2 voltage outputs
 Resolution: 16-bit
 Max Update Rate: 1 MHz (simultaneous update) 
 FIFO: 512
 Output Range: ±10 V
 Output Driving capacity: ±5 mA
 Slew Rate: 20 V/µs

 Setting Time (0.1% of full scale) 2.6 µs
 Offset Error: ±0.1 mV
 Gain error: ±0.1 mV
 Rising time: 0.67  µs
 Falling Time: 0.705 µs

FUNCTION I/O
 Mode: Digital I/O, General Timer/Counter, Pulse generation
 Digital I/O: 16 DO (3.3 V TTL Level) / 16 DI (3.3 V or 5 V TTL Level)
 General Timer/Counter: Four 32-bit, Base clock: 80 MHz, external to 10 MHz
 Pulse generation: Four PWM outputs (Modulation frequency: 0.01 Hz to 5 MHz; Duty cycle: 1%-99%)

ENCODER INPUT
 N° of channels: 2(2)
 Encoder Type: CW/CCW encoder, x 1 AB phase encoder, x 2 AB phase encoder, x 4 AB phase encoder

GENERAL SPECIFICATIONS
 PCI Bus:
5 V and 3.3 V universal PCI bus
 Auto-calibration: Yes
 I/O connector: Two 68-pin SCSI-VHDCI female
 Operation Temperature: 0 to 55°C
 Storage Temperature: -20 to 70°C
 Humidity: 5 to 95% non-condensing
 Power Requirements:
+5 V 1.2 A typical
+12 V 760 mA typical
-12 V 50 mA typical
 Dimensions: 175 mm x 107 mm (not including connectors)


ANALOG INPUT
 Resolution: 16 Bit
 Number of channels: 16 SE/ 8 DIFF
 Maximum sampling rate (single channel): 250 kS/s
 Programmable Gain: 1, 2, 4, 5, 8, 10, 20, 40
 Input Range: ±10 V, ±5 V, ±2.5 V, ±2 V, ±1.25 V, ±1 V, ±500 mV, ±250 mV
 Offset Error: ±2.6 mV typical, before calibration, ±0.5 mV typical, after calibration
 Gain Error: ±0.2% of FSR, before calibration, ±0.015% of FSR, after calibration
 -3dB Small Signal Bandwidth (Gain=1): 1.5 MHz
 System noise (Gain=1): 0.5 mVRMS
 CMRR (Gain=1): 93.5 dB
 SFDR (Spurious-free dynamic range, Gain=1): 95 dB
 SINAD (Signal-to-Noise and Distortion Ratio, Gain=1): 86 dB
 THD (Total Harmonic distortion, Gain=1): -94 dB
 SNR (Signal-to-Noise Ratio, Gain=1): 87 dB
 ENOB (Gain=1) 13.9 bits
 FIFO Buffer size: 1 k samples
 Trigger Sources: Software, external digital, SSI
 Trigger Mode: Post trigger, retrigger, gate trigger
 External conversion source: Yes (up to 250 kS/s)
 Input Coupling: DC
 Over voltage protection: Continuous ±30 V
 Input impedance: High Impedance > 1GO
 Data Transfer: Programmed I/O, Interrupt, Bus Mastering DMA

ANALOG OUTPUT
 N° of channels: 2 voltage outputs
 Resolution: 16-bit
 Max Update Rate: 1 MHz (simultaneous update) 
 FIFO: 512
 Output Range: ±10 V
 Output Driving capacity: ±5 mA
 Slew Rate: 20 V/µs

 Setting Time (0.1% of full scale) 2.6 µs
 Offset Error: ±0.1 mV
 Gain error: ±0.1 mV
 Rising time: 0.67  µs
 Falling Time: 0.705 µs

FUNCTION I/O
 Mode: Digital I/O, General Timer/Counter, Pulse generation
 Digital I/O: 16 DO (3.3 V TTL Level) / 16 DI (3.3 V or 5 V TTL Level)
 General Timer/Counter: Four 32-bit, Base clock: 80 MHz, external to 10 MHz
 Pulse generation: Four PWM outputs (Modulation frequency: 0.01 Hz to 5 MHz; Duty cycle: 1%-99%)

ENCODER INPUT
 N° of channels: 2(2)
 Encoder Type: CW/CCW encoder, x 1 AB phase encoder, x 2 AB phase encoder, x 4 AB phase encoder

GENERAL SPECIFICATIONS
 PCI Bus:
5 V and 3.3 V universal PCI bus
 Auto-calibration: Yes
 I/O connector: Two 68-pin SCSI-VHDCI female
 Operation Temperature: 0 to 55°C
 Storage Temperature: -20 to 70°C
 Humidity: 5 to 95% non-condensing
 Power Requirements:
+5 V 1.2 A typical
+12 V 760 mA typical
-12 V 50 mA typical
 Dimensions: 175 mm x 107 mm (not including connectors)