|
Technology
|
|
|
|
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE802.3x Flow Control and Back-pressure
IEEE 802.3af Power Over Ethernet
|
|
|
|
|
Store and Forward architecture
|
|
|
Interface
|
|
|
|
5 x RJ-45 for 10/100 Base-TX, Auto MDI/MDI-X
|
|
|
|
|
10Base-T: 4-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm(100m)
100Base-TX: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm(100m)
|
|
|
|
|
Power x 3 (Green), Fault x 1(Red)
PoE x 4(Green)
Link/Activity x 5 (Green on / Green Blinking)@100Mbps, (Yellow on / Yellow Blinking)@10Mbps
|
|
|
|
|
Dry Relay output for port and power event alert.
|
|
|
Performance
|
|
|
|
14,880 pps for Ethernet
148,800 pps for Fast Ethernet
|
|
|
|
|
64 bytes to 1522 bytes (with VLAN tag)
|
|
|
|
|
|
|
|
|
|
|
|
Power Requirements
|
|
|
|
Input Voltage:
48VDC or -48VDC, dual inputs in terminal block connection
AC /DC Power Adapter 48VDC/ 1.6A (option)
Power input connector:
Two Power inputs via the Terminal Block (12 ~24 AWG power cable)
One DC jack for AC/D power adapter.
Reverse Polarity Protection: Present
|
|
|
|
|
6.5Watts without PD loading
70Watts with PD full loading
|
|
|
|
|
Port 1~4
Per port 15.4W ability.
RJ-45 pin assignment: TX (3,6), RX (1,2), V+ (4,5), V-(7,8)
|
|
|
|
|
|
|
|
Switch 1~5: Port 1~5 link down alarm Enable/Disable
Switch 6: Power fault alarm Enable/Disable.
|
|
|
Mechanical
|
|
|
|
DIN-rail kit and wall mounting
|
|
|
|
|
IP-31 protection, Aluminum case, Fanless design
|
|
|
|
|
33.8 mm (H) x 164.8 mm(W) x 108 mm (D)
|
|
|
Environmental
|
|
|
|
|
|
|
5% to 95% (Non-condensing)
|
|
|
|
|
|
Regulatory Approvals
|
|
|
|
FCC Class A, EN55022 Class A
|
|
|
|
|
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-8, EN61000-4-11
|
|
|
|
|
|
|
|
|
|
|
|
|
|
