ANALOG INPUT
Resolution: 14 bits
Number of channels: 4 simultaneous-sampling channels with differential input
Maximum sampling rate: 2 MS/s
Programmable gain: 1, 2, 4, 8
Bipolar input ranges: ±10 V, ±5 V, ±2.5 V, ±1.25 V
Unipolar input ranges: 0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V
Offset error: ±3 mV
Gain Error: ±0.03% of FSR
Input coupling: DC
Overvoltage protection:
- Power on: Countinuous ±35 V
- Power off: Countinuous ±15 V
Input impendance: 1 GO/100pF
CMRR (gain = 1): 85 dB
-3dB small signal bandwidth (gain = 1): 1 MHz
Trigger sources: Software, external digital/analog trigger, SSI bus
Trigger modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
FIFO buffer size: 8 k samples
Data transfer: polling, scatter-gather DMA
ANALOG OUTPUT
Number of channels: 2 voltage outputs
Resolution: 12 bits
Output ranges: 0-10V, ±10 V, 0-AOEXTREF, ±AOEXTREF
Maximum update rate: 1 µs
Slew rate: 20 V/µs
Setting time: 3 µs to ±0.5 LSB accuracy
Offset error: ±1 mV
Gain error: ±0.02% of max. output
Driving capacity: ±5 mA
Stability: Any passive load, up to 1500 pF
Treigger sources: Software, external digital/analog trigger, SSI bus
Trigger modes: Post-trigger, delay-trigger, and repeated trigger
FIFO buffer size: 2 k samples
Data transfer: Programmed I/O, scatter-ghater DMA
DIGITAL I/O
Numbers of channels: 8255 24-bit programmable input/output
Compatibility: 5 V/TTL
Data transfers: Programmed I/O
TIMER/COUNTER
Number of channels: 2
Resolution: 16 bit
Compatibility: 5 V/TTL
Base clock available: 40 MHz, external clock up to 10 MHz
AUTO CALIBRATION
On-board reference: +5 V
Temperature drift: ±2 ppm/°C
Stability: ±6 ppm/1000 Hrs
GENERAL SPECIFICATIONS
Dimensions (not including connectors): 168 x 107 mm (not including connectors)
Connector: 68-pin VHDCI female
Operating temperature: 0 to 55°C
Storage temperature: -20 to 70°C
Humidity: 5 to 95% noncondensing
Power requirements: +3.3 V 1.246 A, +12 V 0.448 A typical
