|
Technology
|
|
Standard
|
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3ab 1000Base-T
IEEE 802.3af Power over Ethernet
IEEE 802.3at High Power PoE
|
|
Performance
|
|
|
|
Power Sourcing Equipment (PSE) with Auto detection, classfication, powering and disconnection
|
|
|
|
|
Alternative-A: JetCon 1702-A : RJ-45 (1,2):V-, RJ-45 (3,6):V+
Alternative-B: JetCon 1702-B :RJ-45 (4,5):V+, RJ-45 (7,8):V -
|
|
|
|
|
IEEE 802.3af: 15W @DC 48V, per port
IEEE 802.3at: 30W @ DC 53V, per port
|
|
|
|
|
|
|
|
PoE over temperature, Over current and Under/ Over voltage protetion
Over Current Protection (Icut): 600mA , IEEE 802.3at, 350mA IEEE 802.3af
|
|
|
Interface
|
|
|
|
Data Port : Two RJ-45 connectors
|
|
|
|
|
Data and Power: Two RJ-45 connectors with PoE power output
|
|
|
|
|
4-Pin removable Terminal Block Connector 2 conductors for DC input, 1 conductor for Surge protection
|
|
|
System Diagnostic LEDs
|
|
|
|
Sys Pwr : System power is on applying (Green on)
|
|
|
|
|
PSE 1, PSE 2: PoE powering (Green on), PoE over current or cable short (Green slow blinking), PoE system over voltage or over temperature (Green fast blinking)
|
|
|
Power Requirements
|
|
|
|
DC 46~57V with polarity reverse protection
|
|
|
|
|
JetCon 1702-A/ JetCon 1702-B (Maximum): 2W without PoE loading (Maximum) JetCon 1702-A/ JetCon 1702-B (Maximum with PoE FullLoading): IEEE 802.3af 35.04W@DC48V, IEEE 82.3at 60.42W@DC53V, IEEE 802.3at 70.2W@DC 57V
|
|
|
|
|
0.2A/ DC 46V, 0.224A/ DC 48V, 0.271A/ DC53V, 0.33A/ DC 57V
|
|
|
Mechanical
|
|
|
|
|
|
|
Steel Metal Housing with Ingress Protection – IP 30
|
|
|
|
|
111.8 mm(H) x 30mm (W) x 89.5mm (D)
|
|
|
|
|
0.485 kg with package
0.335 kg without package
|
|
|
Environmental
|
|
|
|
|
|
|
0% ~ 95% (non-condensing)
|
|
|
|
|
|
|
|
|
Regulatory Approvals
|
|
|
|
CE, FCC A, IEC/EN61000-6-2, IEC/EN61000-6-4 MIL-STD 1275 - Power port with DC48V source
|
|
|
|
|
498,000 Hours ,MIL-HDBK-217F
|
|
|
|
|
