ANALOG INPUT
Resolution: 12 bits, no missing codes
Number of channels: 96 single-ended or 48 differential (software selectable per channel)
Channel gain queue size: 1024
Maximum sampling rate: 3 MS/s
Programmable gain: 1, 2, 4, 5, 8, 10, 20, 40, 50, 200
Bipolar input ranges: Max. : ±10 V, ±5 V, ±2.5 V, ±2 V, ±1.25 V, ±1 V, ±0.5 V, ±0.25 V, ±0.2 V, ±0.05 V
Unipolar input ranges: Max. : 0-10 V, 0-5 V, 0-4 V, 0-2.5 V, 0-1 V, 0-0.5 V, 0-0.4 V, 0-0.1 V
Offset error: ±1 mV
Gain error: ±0.03 % of FSR
Input coupling: DC
Overvoltage protection: Power on: Power on: Continuous ±30 V, Power off: Continuous ±15 V
Input impedance: 1 GΩ/100 pF
CMRR (gain = 1): 90 dB
Settling time: 1 µs to 0.1 % error
-3dB small signal bandwidth (gain = 1): 2 MHz
Trigger sources: Software, external digital/analog trigger, SSI bus
Trigger modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
FIFO buffer size: 1 k samples
Data transfers: Polling, scatter-gather DMA
DIGITAL I/O
Number of channels: 24-CH 8255 programmable input/output
Compatibility: 5 V/TTL
Data transfers: Programmed I/O
Auto Calibration
On-board reference: +5 V
Temperature drift: ±2 ppm/°C
Stability: ±6 ppm/1000 Hrs
General Specifications
Dimensions: 168 mm x 107 mm (not including connectors)
Connector: 68-pin VHDCI female x 2
Operating temperature: 0 to 55°C
Storage temperature: -20 to 70°C
Humidity: 5 to 95 %, noncondensing
Power requirements: +3.3 V 0.81 A, +12 V 0.568 A typical
