Cerca
Filters
Close

conga-SEVAL

Carrier board di sviluppo per moduli SMARC 2.0
Caratteristiche
  1. SMARC 2.0 Evaluation Carrier Board
  2. Reference Carrier Board
Produttore:: Congatec AG


I/O Interfaces:
- 1x PCIe x4 | 1x miniPCIe | 1x PCIe x1 | 1x M.2 socket Key E
- 1x SATA
- 1x USB 3.0 | 1x USB 2.0 | 1x micro USB 2.0 (OTG) | 1x USB Type C with PD and DP1 via Alternate Mode
- 2x RS-232 (1x internal RX/TX on pinheader, 1x RX/TX w/ handshake on DSUB9)
- 2x CAN
- GPIO
- 1x SDIO interface
- 2x I²C Bus
- 1x eSPI/SPI1 on header
- 1x SPI Bus
- 1x FAN control
- 1x Disk Drive Power Output
 

Internal Graphic Interface:
- 2x24 bit LVDS connector shared with 2x eDP or 2xDSI

External Graphic Interfaces:

- 1x DP++
- 1x HDMI

Audio
- I2S Audio interface and HDA interface


I/O Interfaces:
- 1x PCIe x4 | 1x miniPCIe | 1x PCIe x1 | 1x M.2 socket Key E
- 1x SATA
- 1x USB 3.0 | 1x USB 2.0 | 1x micro USB 2.0 (OTG) | 1x USB Type C with PD and DP1 via Alternate Mode
- 2x RS-232 (1x internal RX/TX on pinheader, 1x RX/TX w/ handshake on DSUB9)
- 2x CAN
- GPIO
- 1x SDIO interface
- 2x I²C Bus
- 1x eSPI/SPI1 on header
- 1x SPI Bus
- 1x FAN control
- 1x Disk Drive Power Output
 

Internal Graphic Interface:
- 2x24 bit LVDS connector shared with 2x eDP or 2xDSI

External Graphic Interfaces:

- 1x DP++
- 1x HDMI

Audio
- I2S Audio interface and HDA interface

Specifiche di prodotto
Standard di riferimento SMARC
Download
Specifiche di prodotto
Standard di riferimento SMARC