Search
Filters
Close

DAQ-2206

64-CH 16-Bit 250 kS/s Multi-Function DAQ Card
Caratteristiche
  • Supports a 32-bit 3.3 V or 5 V PCI bus
  • 64-CH single-ended or 32-CH differential analog inputs
  • 16-bit A/D resolution
  • On-board 1 K-sample A/D FIFO
  • Bipolar or unipolar analog input ranges
  • Programmable gains: x1, x2, x4, x8
Manufacturer: Adlink Technology Inc.
ANALOG INPUT
Resolution: 16 bits, no missing codes
Number of channels: 64 single-ended or 32 differential (software selectable per channel)
Channel gain queue size: 512
Maximum sampling rate: 250 MS/s
Programmable gain: 1, 2, 4, 8
Bipolar input ranges: ±10 V, ±5 V, ±2.5 V, ±1.25 ±
Unipolar input ranges: 0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V
Offset error: ±1 mV
Gain Error: ±0.01% of FSR
Input coupling: DC
Overvoltage protection:
    - Power on: Countinuous ±30 V
    - Power off: Countinuous ±15 V
Input impendance:
1 GO/100pF
CMRR (gain = 1): 83 dB
Setting Time: 4 µs to 0.1% error
-3dB small signal bandwidth (gain = 1): 760 kHz
Trigger sources:  Software, external digital/analog trigger, SSI bus
Trigger modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
FIFO buffer size: 1 k samples
Data transfer: polling, scatter-gather DMA

ANALOG OUTPUT
Number of channels: 2 voltage outputs
Resolution: 12 bits
Output ranges: 0-10V, ±10 V, 0-AOEXTREF, ±AOEXTREF
Maximum update rate: 1 µs
Slew rate: 20 V/µs
Setting time: 3 µs to ±0.5 LSB accuracy
Offset error: ±1 mV
Gain error: ±0.02% of max. output
Driving capacity: ±5 mA
Stability: Any passive load, up to 1500 pF
Treigger sources: Software, external digital/analog trigger, SSI bus
Trigger modes: Post-trigger, delay-trigger, and repeated trigger
FIFO buffer size: 1 k samples
Data transfer: Programmed I/O, scatter-ghater DMA

DIGITAL I/O
Numbers of channels: 24-CH 8255 programmable input/output
Compatibility: 5 V/TTL
Data transfers: Programmed I/O

GENERAL-PURPOSE TIMER/COUNTER
Number of channels: 2
Resolution: 16 bit
Compatibility: 5 V/TTL
Base clock available: 40 MHz, external clock up to 10 MHz

AUTO CALIBRATION
On-board reference: +5 V
Temperature drift: ±2 ppm/1000 Hrs
Stability: ±6 ppm/1000 Hrs

GENERAL SPECIFICATIONS
Dimensions (not including connectors): 175 x 107 mm
Connector: 68-pin VHDCI female x 2
Operating temperature: 0 to 55°C
Storage temperature: -20 to 80°C
Humidity: 5 to 95% noncondensing
Power requirements: +5V 1.2 A typical
ANALOG INPUT
Resolution: 16 bits, no missing codes
Number of channels: 64 single-ended or 32 differential (software selectable per channel)
Channel gain queue size: 512
Maximum sampling rate: 250 MS/s
Programmable gain: 1, 2, 4, 8
Bipolar input ranges: ±10 V, ±5 V, ±2.5 V, ±1.25 ±
Unipolar input ranges: 0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V
Offset error: ±1 mV
Gain Error: ±0.01% of FSR
Input coupling: DC
Overvoltage protection:
    - Power on: Countinuous ±30 V
    - Power off: Countinuous ±15 V
Input impendance:
1 GO/100pF
CMRR (gain = 1): 83 dB
Setting Time: 4 µs to 0.1% error
-3dB small signal bandwidth (gain = 1): 760 kHz
Trigger sources:  Software, external digital/analog trigger, SSI bus
Trigger modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
FIFO buffer size: 1 k samples
Data transfer: polling, scatter-gather DMA

ANALOG OUTPUT
Number of channels: 2 voltage outputs
Resolution: 12 bits
Output ranges: 0-10V, ±10 V, 0-AOEXTREF, ±AOEXTREF
Maximum update rate: 1 µs
Slew rate: 20 V/µs
Setting time: 3 µs to ±0.5 LSB accuracy
Offset error: ±1 mV
Gain error: ±0.02% of max. output
Driving capacity: ±5 mA
Stability: Any passive load, up to 1500 pF
Treigger sources: Software, external digital/analog trigger, SSI bus
Trigger modes: Post-trigger, delay-trigger, and repeated trigger
FIFO buffer size: 1 k samples
Data transfer: Programmed I/O, scatter-ghater DMA

DIGITAL I/O
Numbers of channels: 24-CH 8255 programmable input/output
Compatibility: 5 V/TTL
Data transfers: Programmed I/O

GENERAL-PURPOSE TIMER/COUNTER
Number of channels: 2
Resolution: 16 bit
Compatibility: 5 V/TTL
Base clock available: 40 MHz, external clock up to 10 MHz

AUTO CALIBRATION
On-board reference: +5 V
Temperature drift: ±2 ppm/1000 Hrs
Stability: ±6 ppm/1000 Hrs

GENERAL SPECIFICATIONS
Dimensions (not including connectors): 175 x 107 mm
Connector: 68-pin VHDCI female x 2
Operating temperature: 0 to 55°C
Storage temperature: -20 to 80°C
Humidity: 5 to 95% noncondensing
Power requirements: +5V 1.2 A typical