Search
Filters
Close

VDX-6353RD

PC/104 module with DM&P Vortex86DX 800 MHz
Caratteristiche
  • DM&P SoC CPU Vortex86DX- 800MHz
  • PC/104 standard compliant
  • 256/512MB DDR2 onboard
  • Watchdog Timer, software programmable from 30.5 µsec. to 512 sec
  • XGI Volari Z9s Chipset, onboard 32MB VGA Memory
  • CM119 USB Audio Controller (Optional)
  • Integrated 10/100Mbps Ethernet
  • Onboard 4MB SPI Flash Disk
  • Support Compact Flash Type I/II
  • Support MSTI EmbedDisk Module
  • 44-pin IDE to microSD (Optional)
  • Operation Temperature: -20°C ~ +70°C, -40°C ~ +85°C (Optional)
Manufacturer: ICOP Technology Inc.

 SoC
-DM&P SoC CPU Vortex86DX- 800MHz
Real Time Clock with Lithium Battery Backup
L1:16K I-Cache, 16K D-Cache L2 Cache 128KB

Bus
PC/104 standard compliant

BIOS
-
AMI BIOS

System Memory
256 / 512MB DDR2 Onboard

Watchdog Timer
Software programmable from 30.5µ sec.to 512 sec. x 2 sets (Watchdog 1 fully compatible with M6117D)

 Display Interface: 
XGI Volari Z9s Chipset
VGA and TFT/LVDS Flat Panel Interface Support
Onboard 32MB VGA Memory, support resolution up to 1280 x 1024, 16M colors

 LAN: Integrated 10/100Mbps Ethernet

Audio: CM119 USB audio controller (Optional)
 
Flash Disk Support: 
Onboard 4MB SPI Flash Disk
MSTI EmbedDisk Module (16MB and above)
Compact Flash Type I/II
44-pin IDE to Micro SD (Optional)
  
 PWM: 16-24 channels

I/O Interface: 
Enhanced IDE port (UltraDMA-100/66/33) x1
RS-232 port x3
RS-232/422/485 port x1
USB port (Ver2.0) x2
Parallel port x1
16-bit GPIO port x1
10/100Mbps Ethernet port x1

Connectors:
2.0mm 44-pin box header for IDE x1
2.0mm 44-pin box header for LCD x1
2.0mm 26-pin box header for Printer x1
2.0mm 20-pin box header for 16-bit GPIO x1
2.0mm 16-pin header for LVDS x1
2.0mm 10-pin box header for VGA x1
2.0mm 10-pin box header for USB x1
2.0mm 10-pin box header for RS-232 x4
2.0mm 8-pin header for Ethernet x1
2.54mm 5-pin box header for Keyboard x1
2.54mm 5-pin header for Mouse x1
2.54mm 4-pin header for -5V, -12V +12V, GND x1
2.54mm 3-pin header for RS-485 x1
2.54mm 2-pin header for Reset x1
2.54mm 7-pin header for Redundancy Signal x1 (Optional)
2.54mm 2-pin header for System-Fail-SW x1 (Optional)
1.25mm 6-pin wafer for JTAG x1
1.25mm 4-pin wafer for Line-out/MIC-in x2 (Optional)

Power Requirement Single Voltage +5V @ 720mA

 Dimensions & Environmental
-Weight 90g
-Board Size 90 X 96mm (3.54 x 3.77 inches)
-Operating Temperature
(-20°C ~ +70°C)
(-40°C ~ +85°C Optional)

 SoC
-DM&P SoC CPU Vortex86DX- 800MHz
Real Time Clock with Lithium Battery Backup
L1:16K I-Cache, 16K D-Cache L2 Cache 128KB

Bus
PC/104 standard compliant

BIOS
-
AMI BIOS

System Memory
256 / 512MB DDR2 Onboard

Watchdog Timer
Software programmable from 30.5µ sec.to 512 sec. x 2 sets (Watchdog 1 fully compatible with M6117D)

 Display Interface: 
XGI Volari Z9s Chipset
VGA and TFT/LVDS Flat Panel Interface Support
Onboard 32MB VGA Memory, support resolution up to 1280 x 1024, 16M colors

 LAN: Integrated 10/100Mbps Ethernet

Audio: CM119 USB audio controller (Optional)
 
Flash Disk Support: 
Onboard 4MB SPI Flash Disk
MSTI EmbedDisk Module (16MB and above)
Compact Flash Type I/II
44-pin IDE to Micro SD (Optional)
  
 PWM: 16-24 channels

I/O Interface: 
Enhanced IDE port (UltraDMA-100/66/33) x1
RS-232 port x3
RS-232/422/485 port x1
USB port (Ver2.0) x2
Parallel port x1
16-bit GPIO port x1
10/100Mbps Ethernet port x1

Connectors:
2.0mm 44-pin box header for IDE x1
2.0mm 44-pin box header for LCD x1
2.0mm 26-pin box header for Printer x1
2.0mm 20-pin box header for 16-bit GPIO x1
2.0mm 16-pin header for LVDS x1
2.0mm 10-pin box header for VGA x1
2.0mm 10-pin box header for USB x1
2.0mm 10-pin box header for RS-232 x4
2.0mm 8-pin header for Ethernet x1
2.54mm 5-pin box header for Keyboard x1
2.54mm 5-pin header for Mouse x1
2.54mm 4-pin header for -5V, -12V +12V, GND x1
2.54mm 3-pin header for RS-485 x1
2.54mm 2-pin header for Reset x1
2.54mm 7-pin header for Redundancy Signal x1 (Optional)
2.54mm 2-pin header for System-Fail-SW x1 (Optional)
1.25mm 6-pin wafer for JTAG x1
1.25mm 4-pin wafer for Line-out/MIC-in x2 (Optional)

Power Requirement Single Voltage +5V @ 720mA

 Dimensions & Environmental
-Weight 90g
-Board Size 90 X 96mm (3.54 x 3.77 inches)
-Operating Temperature
(-20°C ~ +70°C)
(-40°C ~ +85°C Optional)