Technology
|
|
IEEE Standards
|
IEEE 802.3 10 Base-T Ethernet
IEEE 802.3u 100 Base-TX Fast Ethernet
IEEE 802.3u 100 Base-FX Fast Ethernet Fiber IEEE 802.3ab 1000 Base-T
IEEE 802.3z Gigabit Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN and GVRP IEEE 802.1QinQ
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE 802.3ad Link Aggregation Protocol (LACP)
IEEE 802.1x Port Based Network Access Protocol
IEEE 802.3af/at Power over Ethernet
|
Performance
|
|
Switch Technology
|
Store and Forward Technology with 5.6Gbps Switch Fabric
|
System Throughput
|
8.3Mega packet per second
|
CPU performance
|
32 bits ARM-9E running at 180 MHz and performance up to 200MIPS; Embedded hardware based watch-dog timer
|
System Memory
|
8M bytes flash ROM, 64M bytes SDRAM
|
Transfer packet size
|
64 bytes to 1522 bytes (includes double VLAN tag)
|
MAC Address
|
8K MAC address table
|
Packet Buffer
|
1Mega bits shared memory for packet buffer.
|
Forwarding performance
|
14,880 pps for Ethernet and 148,800 pps for Fast Ethernet, 1488,100 pps for Gigabit Ethernet
|
Environment Monitoring
|
Embedded board-level thermal detector for system temperature monitoring
|
Interface
|
|
Enclosure Port
|
• 10/100Mbps Ethernet port: 8 x RJ-45
• Gigabit Ethernet port : 2 x RJ-45 with auto MDI/MDI-X function
• 100Mbps / 1000Mbps Fiber port : 2 x SFP Socket for SFP fiber transceiver with Hot- swappable and D.D.M. functions
• RS-232 Console port : 1 x RJ-45 for system configuration
• Digital Input / Relay Output port: 4-Pin removable terminal block connector
• Power input port: 4-Pin removable terminal block connector
|
Ethernet Cable
|
100 Base-TX: 2-pair Cat.5E / Cat.6 FTP/STP cable, EIA/TIA 568B 100 Ohm, 100Meters 1000 Base-T: 4-pair Cat.5E/Cat.6 FTP/STP cable, EIA/TIA 568B 100 Ohm, 100Meters
|
Digital Input
|
Digital Input (Hi): DC 11V~30V Digital Input (Low): DC 10V~0V
Supports sink type signal input with photo-coupler isolation
|
Relay Output
|
Dry Relay output: 0.5A / DC 24V
Supports Multiple Events Binding trigger function.
|
Diagnostic Indicators
|
Power: Green On: (System power applied)
D.I.: Green On (digital signal high level is detected) D.O.: Red On (relay active and form as)
Sys: Green On (System Ready), Blinking ( System perform firmware upgrade)
R.S. (Ring status): Green on (Ring normal) / Blinking (Ring with wrong port), Yellow on (Ring abnormal) / Blinking (device's ring port failed)
LNK (Link): Green on, ACT (Active): Green Blinking
|
Power over Ethernet
|
|
Standard
|
IEEE 802.3af, IEEE 802.3at, End-Span wiring architecture
|
PoE operating mode
|
Auto Mode: IEEE 802.3af/at behaviors with IEEE802.3af 1-Event and IEEE 802.3at 2-Event classification for standard PD
Forced Mode: User configured Power consumption budget control with IEEE 802.3 PoE /PD detection, or forced without PD detection
|
PoE forwarding conductor
|
RJ-45: V+(3,6), V- (1,2)
|
Power forwarding capability
|
PoE Port: 15W/IEEE802.3af, 30W/IEEE 802.3at
|
PoE System Power Budget
|
Port-based system power budget control with first plug-in high priority mechanism
PoE System Power Budget: 240Watts at 75°C Ambient temperature, 95% Humidity
|
Management
|
|
Telnet & Local Console
|
Supports command line interface with Cisco-like commands and maximum 4 sessions; the telnet interface also supports SSH
|
SNMP
|
Support IPv4/IPv6, v1, v2c, v3 with SNMP trap function, trap station up to 4 and can be manually configured the trap server IP address.
|
SNMP MIB
|
MIBII, Bridge MIB, Ethernet-like MIB, VLAN MIB, IGMP MIB, Korenix Private MIB
|
Korenix Utility
|
Supports Korenix View and Korenix NMS with IEEE 802.1AB Link Layer Discovery Protocol for device and link auto-topology discovery
|
Network Time Protocol
|
Supports NTP protocol with daylight saving function and localized time sync function.
|
Management IP Security
|
IP address security to prevent unauthorized access
|
E-mail Warning
|
4 receipt E-mail accounts with mail server authentication
|
System Log
|
Supports both Local or remote Server with authentication
|
IEEE 802.1x
|
Port based network access control, Radius, MAB, TACACS+
|
Network Redundancy
|
|
Multiple Super Ring (MSRTM)
|
New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRingTM, MultiRingTM, SuperChainTM and backward compatible with legacy Super RingTM.
|
Rapid Dual Homing (RDHTM)
|
Multiple uplink paths to one or multiple upper switch
|
TrunkRingTM
|
Integrates port aggregation function in ring path to get higher throughput ring architecture
|
MultiRingTM
|
Couple or multiple rings; Up to 4 100M rings and 2 Gigabit rings in single switch
|
SuperChainTM
|
It is new ring technology with flexible and scalability, compatibility, and easy configurable. The ring includes 2 types of node Switch – Border Switch and Member Switch
|
ITU-T G.8032 ERPS
|
Support ITU-T G.8032 ERPS V1 single ring topology, and ERPS v2 multiple rings with ladder topology
|
Rapid Spanning Tree
|
IEEE802.1D-2004 Rapid Spanning Tree Protocol. Compatible with Legacy Spanning Tree and IEEE 802.1w multiple spanning tree
|
Loop Protection
|
The Loop Protection prevents any network looping caused by RSTP and MSR ring topology change
|
Network Performance
|
|
Port Configuration
|
Port link Speed, Link mode, current status and enable/disable
|
Port Trunk
|
IEEE 802.3ad port aggregation and static port trunk; trunk member up to 8 ports and maximum 5 trunk groups include Gigabit Ethernet port
|
VLAN
|
IEEE 802.1Q Tag VLAN with 256 VLAN Entries and provides 2K GVRP entries 3 VLAN link modes- Trunk, Hybrid and Link access
|
Private VLAN
|
Direct client ports in isolated/community VLAN to promiscuous port in primary VLAN
|
IEEE802.1 QinQ
|
Supports Double VLAN Tag function for implementing Metro Network topologies
|
Class of Service
|
IEEE 802.1p class of service; per port 4 priority queues.
|
Traffic Prioritize
|
Supports 4 physical queues, weighted fair queuing (W.R.R.) and Strict Priority scheme, which follows 802.1p CoS tag and IPv4 ToS/ DiffServ information to prioritize the traffic of your industrial network
|
IGMP Snooping
|
IGMP Snooping v1/v2c /v3 for multicast filtering and IGMP Query mode; also support unknown multicasting process forwarding policies- drop, flooding and forward to router port
|
Rate Control
|
Ingress/Egress filtering for Broadcast, Multicast, Unknown DA or All packets
|
Port Mirroring
|
Online traffic monitoring on multiple selected ports
|
Port Security
|
Port security to assign authorized MAC to specific port
|
DHCP
|
DHCP Client, DHCP Server with IP & MAC Address binding, DHCP relay and port based DHCP server
|
Mechanical
|
|
Installation
|
DIN-Rail mounting
|
Case
|
Steel metal with Aluminum heat-dissipate panel housing
|
Ingress Protection
|
IP31
|
Dimension (mm)
|
80 (W) x 136.2(D) x 160 (H) – w/ DIN Rail Clip
|
Installation
|
DIN-rail mounting
|
Weight
|
1.2Kg
|
Power Requirement
|
|
System power
|
2x DC power input with polarity reverse protection
|
Input Range
|
DC 24V (10-60V)
|
Power system type
|
Passive power system
|
Power Consumption
|
PoE 240W@24V
|
Environmental
|
|
Operating Temperature
|
40 ~75oC
|
Operating Humidity
|
0% ~ 95%, non-condensing
|
Storage Temperature
|
-40 ~ 85oC, 0% ~90% Humidity
|
Hi-Pot
|
DC 2.25KV for power to chassis ground, Ethernet port to chassis ground
|
Regulatory Approvals
|
|
EMC
|
IEC/EN61000-6-2, IEC/EN61000-6-4 Heavy Industrial EMC EMI: FCC Class A, CE/ Class A
EMS:IEC/EN61000-4-2, IEC/EN61000-4-3, IEC/EN61000-4-4, IEC/EN61000-4-5, IEC/EN61000-4-6, IEC/EN61000-4-8
|
Warranty
|
5 years
|