|
Technology
|
|
|
Standard
|
IEEE 802.3u 100Base-TX IEEE 802.3ab 1000Base-T
IEEE 802.3x Flow Control and Back-pressure IIEEE 802.3af Power over Ethernet (PoE)
|
|
Performance
|
|
|
Switch Technology
|
Store and Forward with 32Gbps Switch Fabric
|
|
System Throughput
|
8.3Mega packets per second, 64Bytes packet length
|
|
Transfer packet size
|
64Bytes ~1518Bytes
|
|
MAC Address
|
8K MAC address table
|
|
Packet Buffer
|
1Mega bits shared packet buffer
|
|
Port Event Output
|
Ethernet port event alarm. Configure by DIP Switch.
|
|
DC Power Booster
|
Wide Range power booster: 8~32V input, 48V PoE output
|
|
PoE Power Budget
|
Input 8VDC, 70°C/ 60W
9VDC, 70°C/ 80W
12VDC, 70°C/ 80W
24VDC, 70°C/ 80W
32VDC, 70°C/ 80W
|
|
Interface
|
|
|
Ethernet Port
|
Fast Ethernet: 8 RJ-45 with IEEE 802.3af PoE/PSE, Auto MDI/MDI-X Gigabit Ethernet: 2 RJ-45, Auto MDI/MDI-X
|
|
Power & Relay Port
|
4-Pin Removable Block Connector for Power input, Dry Relay output
|
|
Cable
|
100Base-TX: 4-Pairs UTP/STP Cable, CAT-5e, CAT-6, 100Meters 1000Base-T: 4-Pairs UTP/STP Cable, CAT-5e, CAT-6, 100Meters
|
|
Power over Ethernet
|
IEEE 802.3af Power over Ethernet , 15W/port
System PoE Output (Max.): 80W/70°C with 12V or 24V DC input PoE Output Mode: Alternative-B ( RJ-45 Conductor: 4,5,7,8)
|
|
Event Relay Output
|
Dry Relay Output with DC24V, 1A current capability
|
|
LED
|
System Power: DC Booster Powering (Green on) DO: Alarm Dry Relay Close ( Red on)
Fast Ethernet: Link/Active (Green on/Green Blinking), Full Duplex/Collision (Amber on/Amber Blinking)
Gigabit Ethernet: Link/Active (Green on/Green Blinking), 1000Mbps Link(Amber on),100Mbps Link (Amber off and Green on)
|
|
Power Requirement
|
|
|
System Power
|
Input Voltage: DC12V, DC24V with polarity reverse protection Acceptable voltage variation: DC 8~32V
System Power Consumption:15W/ without PoE Loading
|
|
Mechanical
|
|
|
Enclosure Material
|
Aluminum Alloy with Steel
|
|
Installation
|
DIN Rail Installation
|
|
Enclosure Protection
|
Ingress Protection grade 30 (IP30)
|
|
Dimensions
|
149mm (H) x 66 mm (W) x 131.2 mm (D)
|
|
Environments
|
|
|
Operating Temperature
|
-40°C~70°C, 0~90% Humidity, Non-Condensing, 80Watts PoE Power Consumption
|
|
Storage Temperature
|
-40°C~80°C, 0~90% Humidity, Non-Condensing
|
|
Hi-Pot
|
AC 1KV - Power to Chassis
|
|
Approvals
|
|
|
EMC
|
Vehicle EMC: E-Mark EMI:IEC/EN61000-6-4, FCC Class A EMS:IEC/EN61000-6-2
IEC/EN61000-4-2,IEC/EN61000-4-4, IEC/EN61000-4-5, IEC/EN61000-4-6, IEC/EN61000-4-8
|
|
Safety
|
UL/IEC60950-1
|
