Search

Filters

EGPC-B201-2260

EGPC-B201

M.2 2280 or 2260 B+M Key card with 2x isolated CAN Bus port

Caratteristiche

Alternative M.2 2260 or 2280 B-M key
CANbus 2.0B backward compatible with 2.0A
baud rate 100/125/250/500(default)/800/1000K
Supports CAN message acceptance filter
Keeps configuration after hardware reboot
Up to 6000 CAN messages per second (receive data)
Supports Listen-only mode
Additional driver to support Linux SocketCAN
Supports SAE J1939 high layer protocol (Optional)
Termination resistor enabled/disabled by jumper
Complies with EN61000-4-5 2.5kV surge protection
Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
30μ” golden finger, 3-year warranty
Supports -40 to +85 degrees

Manufacturer: Innodisk Corporation

Info & Quotations

Module Name	M.2 2260/2280 B-M
Module Type	M.2 to Dual Isolated CANbus 2.0B / J1939 Module
Function	CANbus
Form Factor	Factor M.2 2260/2280 B-M
Input I/F	PCI Express 2.0 x 1
Output I/F	CANbus 2.0B
Output connector	DB-9 x 2
Power Consumption	2.69W (3.3V, 815mA)
Dimensions (W x L x H/mm)	22 x 60/80 x 8.05
Temperature	STD temp: 0°~70°C Wide temp: -40°~85°C
Environment	Vibration: 5G @7~2000Hz Shock: 50G @ 0.5ms
Notes	Download driver and API (the same as EMUC-B202) from MyInnodisk website. Windows: XP (32bit), 7 (32/64bit), 8/8.1 (32/64bit), 10 (32/64bit) Linux: Kernel 2.6 and above (Native CDC-ACM driver), Kernel 2.6.38 and above (SocketCAN Driver), 32/64bit QNX: 6.6

Download

Datasheet

Datasheet EGPC-B201

Overview

Module Name	M.2 2260/2280 B-M
Module Type	M.2 to Dual Isolated CANbus 2.0B / J1939 Module
Function	CANbus
Form Factor	Factor M.2 2260/2280 B-M
Input I/F	PCI Express 2.0 x 1
Output I/F	CANbus 2.0B
Output connector	DB-9 x 2
Power Consumption	2.69W (3.3V, 815mA)
Dimensions (W x L x H/mm)	22 x 60/80 x 8.05
Temperature	STD temp: 0°~70°C Wide temp: -40°~85°C
Environment	Vibration: 5G @7~2000Hz Shock: 50G @ 0.5ms
Notes	Download driver and API (the same as EMUC-B202) from MyInnodisk website. Windows: XP (32bit), 7 (32/64bit), 8/8.1 (32/64bit), 10 (32/64bit) Linux: Kernel 2.6 and above (Native CDC-ACM driver), Kernel 2.6.38 and above (SocketCAN Driver), 32/64bit QNX: 6.6