|
Technology
|
|
|
|
IEEE 802.3 10 Base-T Ethernet
IEEE 802.3u 100 Base-TX Fast Ethernet
IEEE 802.3u 100 Base-FX Fast Ethernet Fiber
IEEE 802.3ab 1000 Base-T
IEEE 802.3z Gigabit Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at High power Power over Ethernet
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN and GVRP
IEEE 802.1QinQ
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE 802.3ad Link Aggregation Protocol (LACP)
IEEE 802.1x Port Based Network Access Protocol
IEEE 1588 Precision Time Protocol
|
|
|
System Performance
|
|
|
|
Store and Forward Technology with 32Gbps Switch Fabric
|
|
|
|
|
8.3Mega packet per second
|
|
|
|
|
32 bits ARM-9E running at 180 Mhz and performance up to 200MIPS; Embedded hardware based watch-dog timer.
|
|
|
|
|
8M bytes flash ROM, 64M bytes SDRAM.
|
|
|
|
|
64 bytes to 1522 bytes (includes double VLAN tag).
|
|
|
|
|
|
|
|
1M bits shared memory for packet buffer.
|
|
|
|
|
14,880 pps for Ethernet and 148,800 pps for Fast Ethernet, 1488,100 pps for Gigabit Ethernet
|
|
|
|
|
Embedded board-level thermal detector for system temperature monitoring.
|
|
|
System Management
|
|
Configuration and monitoring interface
|
|
|
Telnet, local RS-232 console, Web- browser interface, SNMP, Trap and SMTP interface.
Cisco-Like CLI, Telnet, Web, TFTP/Web Update for firmware and configuration backup and restore, DHCP client, warm start, factory default, Admin password, Port Speed/Duplex Control, status, statistic, MAC address table display, static MAC, Aging time, SNMP v1, v2c, v3, Traps and RMON groups 1,2,3,9.
|
|
|
|
|
Supports command line interface with Cisco like commands and maximum 4 sessions; the telnet interface also supports SSH.
|
|
|
|
|
v1, v2c, v3 with SNMP trap function, trap station up to 4 and can be manually configured the trap server IP address.
|
|
|
|
|
MIBII, Bridge MIB, Ethernet-like MIB, VLAN MIB, IGMP MIB, Korenix Private MIB.
|
|
|
|
|
Supports Korenix View and Korenix NMS with IEEE 802.1AB Link Layer Discovery Protocol for device finding and link topology discovery
|
|
|
Network Time Protocol(NTP)
|
|
|
Supports NTP protocol with daylight saving function and localize time sync function.
|
|
|
|
|
IP address security to prevent unauthorized access
|
|
|
|
|
4 receipt E-mail accounts with mail server authentication
|
|
|
|
|
Supports both Local or remote Server with authentication
|
|
|
Network Performance
|
|
|
|
Port link Speed, Link mode, current status and enable/disable.
|
|
|
|
|
IEEE 802.3ad port aggregation and static port trunk; trunk member up to 8 ports and maximum 5 trunk groups include Gigabit Ethernet port.
|
|
|
|
|
IEEE 802.1Q Tag VLAN with 256 VLAN Entries and provides 2K GVRP entries 3 VLAN link modes- Trunk, Hybrid and Link access.
|
|
|
|
|
Direct client ports in isolated/community VLAN to promiscuous port in primary VLAN.
|
|
|
|
|
Supports Double VLAN Tag function for implementing Metro Network topologies.
|
|
|
|
|
IEEE 802.1p class of service; per port 4 priority queues.
|
|
|
|
|
Supports 4 physical queues, weighted fair queuing (WRR) and Strict Priority scheme, which follows 802.1p CoS tag and IPv4 ToS/ Diffserv information to prioritize the traffic of your industrial network.
|
|
|
|
|
IGMP Snooping v1/v2c /v3 for multicast filtering and IGMP Query mode; also support unknown multicasting process forwarding policies- drop, flooding and forward to router port.
|
|
|
|
|
Ingress/Egress filtering for Broadcast, Multicast, Unknown DA or All packets.
|
|
|
|
|
Online traffic monitoring on multiple selected ports
|
|
|
|
|
Port security to assign authorized MAC to specific port
|
|
|
|
|
DHCP Client, DHCP Server with IP & MAC Address binding and DHCP agent (option 82).
|
|
|
|
|
Port based network access control and user authentication by radius account, password and key for the radius server authentication.
|
|
|
Power Over Ethernet
|
|
|
|
IEEE 802.3af / IEEE 802.3at; End-span wiring architecture
|
|
|
|
|
Auto mode:Auto detects and powering by IEEE 802.3af / IEEE 802.3at 2-Event behaviors
Forced mode: User configured power consumption without detection, classification
|
|
|
|
|
V+: RJ-45 conductor 3,6
V-: RJ-45 conductor 1,2
|
|
|
|
|
IEEE 802.3af: 15.4W/per port
IEEE 802.3at: 30W/per port
|
|
|
|
|
80W @ 75oC, 95% Humidity, DC 48V power input
|
|
|
|
|
Port-based system power budget control with first plug-in high priority mechanism
|
|
|
Network Redundancy
|
|
Multiple Super Ring (MSRTM)
|
|
|
New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRingTM, MultiRingTM and backward compatible with legacy Super RingTM.
|
|
|
Rapid Dual Homing (RDHTM)
|
|
|
Multiple uplink paths to one or multiple upper switch
|
|
|
|
|
Integrates port aggregation function in ring path to get higher throughput ring architecture
|
|
|
|
|
Couple or multiple rings: JetNet 5310G supports up to 4 100M rings and 2 Gigabit ring in single switch.
|
|
|
|
|
IEEE802.1D-2004 Rapid Spanning Tree Protocol. Compatible with Legacy Spanning Tree and IEEE 802.1w multiple spanning tree.
|
|
|
Interface
|
|
|
|
10/100Mbps PSE port: 8 x RJ-45
Gigabit Ethernet port : 2 x RJ-45 with auto MDI/MDI-X function
100Mbps / 1000Mbps Fiber port:2 x SFP Socket for SFP fiber transceiver with Hot-swappable function.
Console port: 1 x RJ-45 for system configuration
Digital Input / Relay Output port: 4-Pin removable terminal block connector.
Power input port: 4-Pin removable terminal block connector
|
|
|
|
|
100 Base-TX: 2-pairs UTP/STP/FTP Cat.5 cable, EIA/TIA-568B 100-ohm (100m)
1000 Base-T: 4-pair UTP/STP/FTP Cat.5e cable, EIA/TIA-568B 100-ohm (100m)
Uses STP or FTP cable can provide higher electromagnetic resistance to correspond vertical market standard, such as railway EMC – EN50121-4.
|
|
|
|
|
Digital Input (Hi): DC 11V~30V
Digital Input (Low): DC 10V~0V
Supports sink type signal input with photo-coupler isolation
|
|
|
|
|
Dry Relay output: 0.5A / DC 24V.
Supports Multiple Events Binding trigger function
|
|
|
|
|
Power: Green On: (System power applied)
D.I.: Green On (digital signal high level is detected)
D.O.: Red On. (relay active and form as)
Sys: Green On (System Ready), Blinking ( System perform firmware upgrade
R.S. (Ring status): Green on (Ring normal) / Blinking (Ring with wrong port), Yellow on (Ring abnormal) / Blinking (device's ring port failed)
LNK (Link): Green on, ACT (Active): Green Blinking
PoE: Yellow on ( PoE is applying power)
|
|
|
Power Requirements
|
|
|
|
Input Range: DC 46~57V; Inrush Current: 64/ DC 46V input, 76.4A/DC 57V input.
|
|
|
|
|
|
|
|
15Watts without PD loading.
|
|
|
Mechanical
|
|
|
|
|
|
|
Steel metal with Aluminum heat-dissipate panel housing
Ingress Protection – grade 30
|
|
|
|
|
95 (W) x 127 (D) x 160 (H) w/o DIN Rail clip
95 (W) x 136.2 (D) x 160 (H) w/ DIN Rail clip
|
|
