|
Technology
|
|
|
|
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3u 100Base-FX
IEEE 802.3ab 1000Base-T
IEEE 802.3z Gigabit Ethernet Fiber
IEEE 802.3af Power Over Ethernet
IEEE 802.3at High Power PoE with 2-Event classification
IEEE 802.3x flow control and back-pressure
|
|
|
Switch Technology
|
|
|
|
|
|
|
|
|
|
Store and Forward technology
|
|
|
|
|
64bytes ~ 9Kbytes jumbo frame
|
|
|
|
|
10Mbps - 14880 PPS
100Mbps - 14880 PPS
1000Mbps - 14880 PPS
PPS: packet per second
64 bytes packet size
|
|
|
Enclosure Interface
|
|
|
|
5 x RJ-45 with Auto MDI/MDI-X, and auto negotiation and port event function
10/100/1000Base-TX x 2
4 x IEEE 802.3af/IEEE 802.3at compliance PSE ports, Alternative –A powering
|
|
|
|
|
1 x SFP socket for Gigabit 1000Mbps SFP or Fast Ethernet 100Mbps SFP transceiver. Manual selected and activate by DIP-Switch and power reset
|
|
|
|
|
Redundant Power input with polarity protection; designed in 6-pin removable terminal block connector
|
|
|
|
|
1 dry relay output, designed in 6-pin removable terminal block connector. Normal open circuit
|
|
|
|
|
100Base-TX: 2-pairs EIA/TIA 568-B UTP/STP Cat.5e/ Cat.6 cable
1000Base-T: 4-pairs EIA/TIA 568-B UTP/STP Cat.5e/ Cat.6 cable
|
|
|
Alarm Relay
|
|
|
|
Ethernet port (1~6) link down and power event alarm, configure by 6-pin DIP switch
|
|
|
|
|
Dry Output with 0.5 A current forwarding ability with DC 24V external power system
|
|
|
|
|
Normal state (Alarm on) - relay output form an open circuit
Abnormal state (Alarm off) – relay output form a close circuit
|
|
|
Power over Ethernet
|
|
|
|
Gigabit Ethernet port 1 ~ 4
|
|
|
|
|
Alternative- A (Data Pair Power feeding): Port 1~4 , V+ (3,6) V- (1,2)
|
|
|
|
|
IEEE 802.3af and IEEE 802.3at 2-Event
|
|
|
|
|
30W PoE Output for each port,
System Maximum PoE Output
DC24V, 90W/ 75°C / 95% Humidity
DC24V, 110W/ 65°C / 95% Humidity
DC12V, 60W/ 70° C / 95% Humidity
System Inrush Current:
DC 12V / 7.6A, DC 24V/6.1A
|
|
|
Diagnostic LEDs
|
|
|
|
Power 1 (Green), Power 2 (Green) , Alarm (Red)
|
|
|
|
|
RJ-45 port: Link (Green on) /Activity (Green Blinking), PoE powering (Amber or Yellow on), SFP port: Link ( Green on)
|
|
|
Power requirements TBD ( To be Update soon)
|
|
|
|
Power input: DC 12V or DC 24V, Range DC12~36V
Polarity Protection and Over-Current protection
|
|
|
|
|
10 Watts / DC 24V at 75 °C ambient environment without PoE Loading
|
|
|
Mechanical Design
|
|
|
|
EN50022 DIN rail Snap-On mounting
|
|
|
|
|
Steel Metal Housing with Ingress protection grade - IP30
Real / Bottom side panel with heat-dissipation holes
|
|
|
|
|
144mm (H) x 55 mm (W) x 105mm (D) ( without DIN rail Clip)
|
|
|
|
|
|
Environmental
|
|
|
|
-40~75 °C / 110W PoE loading (DC 24V)
|
|
|
|
|
|
|
|
|
|
|
|
Regulatory & Approvals
|
|
|
|
Compliance to IEC 60950-1
Hi-pot DC 2.12KV for Power port to Case, Ethernet Port to Case
|
|
|
|
|
IEC/EN 61000-6-4, CISPR 16-1-2/ -2-1/-2-3, CISPR 22, FCC Class A, CE
|
|
|
|
|
IEC/EN 61000-6-2
IEC 61000-4-2 ESD: Contact 6KV / Air Con. 8KV
IEC 61000-4-3 RS: 80M~1Ghz /20V, 1.4~2Ghz/3V, 2~2.7Ghz /1V
IEC 61000-4-4 EFT: L-L/L-N 2KV, Signal 2KV
IEC 61000-4-5 Surge: L-L/1KV, L-N/2KV, Signal I/O 1KV
IEC 61000-4-6 CS: 0.15M~80Mhz / 10V
IEC 61000-4-8 PFMF: 30A/m Cont. 300A/m 1~3S
|
|
|
Vibration / Shock Protection (Note-1)
|
|
|
IEC /EN 60068-2-27 shock: 50g acceleration, 11ms duration, Half-Sine wave
IEC /EN 60068-2-6 vibration: 10~150Hz, 20m/s2, 20 sweeps / per axis
Note-1: Available for special project inquire
|
|
