|
Technology
|
|
|
|
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX/100Base-FX Fast Ethernet
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1p Class of Service (CoS)
|
|
|
System Performance
|
|
|
|
Store and Forward Technology with 2.0Gbps Switch Fabric
|
|
|
|
|
1.49 Mega packets per second, 64bytes packet size
14,880 pps for 10Base-T
148,800 pps for 100Base-TX
(pps: Packet per Second)
|
|
|
|
|
64 bytes to 1522bytes (includes 1522 bytes VLAN Tag)
|
|
|
|
|
2K MAC address table with auto learning
|
|
|
|
|
448 Kilo bits shared memory for packet buffer
|
|
|
|
|
Dry Relay output with 0.5A / 24VDC ability
|
|
|
|
|
Default enabled.
Traffic threshold: 200 packets/Sec. @100Mbps; 20 packets/Sec. @10Mbps
|
|
|
|
|
Provides 2 packet forwarding Queues: High Queue (4~7), Low Queue (0~3)
|
|
|
|
|
Default Enabled. Supports VLAN tag priority and IPv4 packet precedence
|
|
|
|
|
Provides port and power event alarm; Enabled by 9-PIN DIP switch
|
|
|
Interface
|
|
|
|
6 Fast Ethernet RJ-45
Duplex SC: 2 ports for multi-mode or single-mode fast Ethernet fiber
Alarm relay & Power inputL 6-pin removable terminal block
|
|
|
|
|
10Base-T: 2-pairs UTP/STP Cat. 3, 4, 5 cable, EIA/TIA_568B 100-ohm (100m)
100 Base-TX: 2-pairs UTP/STP Cat. 5 cable, EIA/TIA-568B 100-ohm (100m)
100 Base-FX: Multi-mode (50/125um, 62.5/125um) fiber cable /2KM, Single-mode (8/125um, 9/125um, 10/125um) fiber cable /30KM
RX Snesitivity: 0~-31dBm (max)
Link Budget: 11dB
|
|
|
|
|
JetNet 3008f-m V3
Wave-length: 1310nm
Tx Power: -14~-20dBm (Min.)
Rx Sensitivity: 0~-31dBm (Max.)
Link Budget: 11dB
JetNet 3008f-s V3
Wave-length: 1310nm
Tx Power: -15~-8dBm (Min.)
Rx Sensitivity: -34~-8dBm (Max.)
Link Budget: 19dB
|
|
|
System Diagnostic LEDs
|
|
|
|
Power status (Green): On (power is on applying)
Alarm Output (Red): On (Output conductor is formed as a close circuit)
|
|
|
|
|
RJ-45: Link (Green on) / Activity (Green blinks)
100Mbps Link (Yellow on) / 10Mbps Link (Yellow off)
100Mbps Fiber: Link (Green on)/Active (Green blinks)
|
|
|
Power Requirements
|
|
|
|
2 x Redundant power input with polarity auto reverse protection
Power Input Range: DC 24V (10~60V)
Power System Type: Positive or Negative power source
|
|
|
|
|
6.0 Watts / 24V ; Inrush current: 62A @ DC60V
|
|
|
Mechanical
|
|
|
|
|
|
|
Aluminum metal case with IP31 grade protection
|
|
|
|
|
55 (W) x 120(H) x 108 (D) / with DIN rail clip)
55 (W) x 120 (H) x 99 (D) / without DIN Rail Clip
|
|
|
|
|
|
Environmental
|
|
|
|
-10 ~ 70oC (JetNet 3008f V3)
-40 ~ 75oC (JetNet 3008f-w V3)
|
|
|
|
|
0% ~ 95% (non-condensing)
|
|
|
|
|
|
|
|
AC 1.5KV for Port-Port / Port-Case / Port-Power, DC 1.5KV Power-Case
|
|
|
Regulatory Approvals
|
|
|
|
CISPR 16-1-2 / 16-2-1 / 16-2-3 / 22
FCC Part 15 Subpart B Class A, ANSI C63.4
Heavy Industrial IEC/EN61000-6-4
|
|
|
|
|
Heavy Industrial IEC/EN61000-6-2
IEC 61000-4-2, IEC61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8
|
|
|
|
|
IEC 60068-2-32 with packageNote-1
|
|
|
|
|
|
|
|
Note-1: Korenix's internal testing
|
|
