Search
Filters
Close

PCI-9112/9112A

16-CH, 12-Bit, 110 kS/s Multi-Function DAQ Card

Caratteristiche
  1. Supports a 3.3 V or 5 V PCI bus
  2. 12-bit A/D and sampling rate up to 110kS/s
  3. 16-CH single-ended or 8-CH differential inputs
  4. On-board A/D FIFO
  5. Bipolar or unipolar analog input ranges
  6. Programmable gains of x0.5, x1, x2, x4, x8
  7. Automatic analog inputs scanning
  8. Bus-mastering DMA for analog inputs
  9. 2-CH 12-Bit multiplying analog outputs
  10. 16-CH TTL digital inputs and 16-CH TTL digital outputs
  11. 1-CH 16-Bit general-purpose timer/counter
  12.  

Manufacturer: Adlink Technology Inc.


ANALOG INPUT

Number of channel: 16 single-ended or 8 differential
Resolution: 12 bits
Conversion time: 8µs
Maximum sampling rate: 110 kS/s
Input signal ranges:

Gain Input range
Bipolar Unipolar
0.5 ±10 V  
1 ±5 V 0 to 10 V
2 ±2.5 V 0 to 5 V
4 ±1.25 V 0 to 2.5 V
8 ±0.625 0 to 1.25 V


Accuracy

Gain Accuracy
0.5, 1 0.01% of FSR ± 1 LSB
2, 4 0.02% of FSR ± 1 LSB
8 0.04% of FSR ± 1 LSB


Input coupling: DC
Overvoltage protection: continuous ±35V
Input impendance: 1GO
Trigger modes: software
Data transfer: programmed I/O, interrupt, bus mastering DMA

ANALOG OUTPUT
Number of channels: 2 voltage outputs
Resolution: 12 bits
Output ranges (software programmable):  Unipolar: 0 to 10 V, 0 to 5 V, 0 to EXTREF
Output driving capacity: ±5 Ma max
Setting time: 30µs to 0.5 LSB
Data transfers: programmed I/O

DIGITAL I/O
Number of channels: 16 inputs and 16 outputs
Compatibility: 5V / TTL
Data transfers: programmed I/O

GENERAL-PURPOSE TIMER/COUNTER
Number of channels: 1
Resolution: 16 bits
Compatibility: 5 V/TTL
Base clock available: 2 MHz, external clock to 10MHz
 

CALIBRATION
 PCI-9112: Calibrate Analog Output on 5V
 PCI-9112A: 1Calibrare Analog Output on 10 V


GENERAL SPECIFICATION
I/O Connector: 37-pin D-sub female
Operating temperature: 0 to 60°C
Storage temperature: -20 to 80°C
Relative humidity: 5 to 95%, noncondensing
 Power requirements: +5V 460 mA typical, +12V 110 mA typical
Dimensions (not including connectors):  175 x 107 mm


ANALOG INPUT

Number of channel: 16 single-ended or 8 differential
Resolution: 12 bits
Conversion time: 8µs
Maximum sampling rate: 110 kS/s
Input signal ranges:

Gain Input range
Bipolar Unipolar
0.5 ±10 V  
1 ±5 V 0 to 10 V
2 ±2.5 V 0 to 5 V
4 ±1.25 V 0 to 2.5 V
8 ±0.625 0 to 1.25 V


Accuracy

Gain Accuracy
0.5, 1 0.01% of FSR ± 1 LSB
2, 4 0.02% of FSR ± 1 LSB
8 0.04% of FSR ± 1 LSB


Input coupling: DC
Overvoltage protection: continuous ±35V
Input impendance: 1GO
Trigger modes: software
Data transfer: programmed I/O, interrupt, bus mastering DMA

ANALOG OUTPUT
Number of channels: 2 voltage outputs
Resolution: 12 bits
Output ranges (software programmable):  Unipolar: 0 to 10 V, 0 to 5 V, 0 to EXTREF
Output driving capacity: ±5 Ma max
Setting time: 30µs to 0.5 LSB
Data transfers: programmed I/O

DIGITAL I/O
Number of channels: 16 inputs and 16 outputs
Compatibility: 5V / TTL
Data transfers: programmed I/O

GENERAL-PURPOSE TIMER/COUNTER
Number of channels: 1
Resolution: 16 bits
Compatibility: 5 V/TTL
Base clock available: 2 MHz, external clock to 10MHz
 

CALIBRATION
 PCI-9112: Calibrate Analog Output on 5V
 PCI-9112A: 1Calibrare Analog Output on 10 V


GENERAL SPECIFICATION
I/O Connector: 37-pin D-sub female
Operating temperature: 0 to 60°C
Storage temperature: -20 to 80°C
Relative humidity: 5 to 95%, noncondensing
 Power requirements: +5V 460 mA typical, +12V 110 mA typical
Dimensions (not including connectors):  175 x 107 mm