Search
Filters
Close

JetWave-4020/4020E

Industrial Dual Band Dual Radio 802.11ac Wireless AP

Caratteristiche
  1. Industry leading 802.11ac WIFI performance
  2. Dual Band Dual Radios, 2.4G 802.11n + 5.8G 802.11ac Wave 1, 3rd Radio by option
  3. Up to 1.16Gbps concurrent performance
  4. Internal Dual band 9/10dBi 4T4R MIMO Antenna for both Ceiling/Wall-mounting installation
  5. N-Type Connector for external antenna (4020E)
  6. Dual M12 Gigabit Ethernet Bridging or NAT Routing
  7. Controller-based AP management and 100ms Super Roaming, SNMPv1/v2c/v3, Trap, LLDP for NMS
  8. WPA/WPA2 Security & VPN/IPSec Connectivity
  9. IP67 Water-proof, -40°~70°C operating temperature, EN50121-4 EMC protection
  10. M12 24V/110VDC Power Input
  11. M12 USB for configuration restoring
Manufacturer: Korenix Technology Co.
Technology
 
Standard
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 10/100Base-TX,
IEEE 802.3ab for 1000BaseT
IEEE 802.11n/g Wireless LAN
IEEE 802.11ac Wave 1 Wireless LAN
IEEE 802.11i Wireless Security
Highest Data Rate:
2.4G IEEE 802.11n: 300Mbps @ 40MHz
5G IEEE 802.11ac: 866Mbps @ 80MHz
Interface
 
Ethernet Port
1x 10/100/1000Base-T(X) WAN
1x 10/100/1000Base-T(X) LAN
M12 X-code Connector
WIFI
IEEE802.11n 2.4G Band, 2T2R MIMO IEEE802.11ac 5G Band, 2T2R MIMO
USB + Console
USB + RS-232 Diagnostic Console, M12 A-code Connector
Power Input
2x 24VDC (±15%) Power Input, M12 A-code Connector
*2x 110V(±15%) by option
WIFI
 
Chipset
Qualcomm Atheros Processor and 802.11ac WIFI Chipset
Capability
5G IEEE 802.11ac Wave 1 + 2.4G IEEE 802.11n
5G: IEEE 802.11ac 2T2R MIMO, up to 866Mbps PHY Rate, 20-/40-/80-MHz Channels 2.4G: IEEE 802.11n 2T2R MIMO, up to 300Mbps PHY Rate, 20-/40-/80-MHz Channels Dual Radio Concurrent Design, up to 1.16Gbps PHY Rate
MIMO
5G: IEEE 801.11ac 2T2R MIMO
2.4G: IEEE 801.11n 2T2R MIMO
RF Modulation
802.11ac, 802.11g/n: OFDM (BPSK,QPSK,16-QAM,64QAM; 256QAM@11ac)
Operating Frequency
5GHz Typical Band: (802.11ac WIFI)
CE: 5.170~5.250GHz, 5.500~5.700GHz, Support Dynamic Frequency Selection (DFS)
FCC: 5.170~5.250GHz, 5.740~5.825GHz
(Programmable for other 5G Band)
2.4GHz Band: (802.11n WIFI)
2.412~2.472GHz
(Programmable for different country regulations)
RF Output Power
5.8GHz Band:
27dB EIRP for ETSI 301 893 (Band 3)
Certificated for use with up to 10dBi anntenna gain
2.4GHz Band:
20dB EIRP for CE (ETSI 300 328)
Certificated for use with up to 9dBi anntenna gain
(Controllable for different country regulations, check user manual for detail)
RF Sensitivity
(1st Radio, 2.4G Band)
802.11b: -86dBm@11M 1Rx
802.11g: -85dBm@6M 1Rx, -72dBm@54M 1Rx
802.11n HT20: -85dBm@6.5M 1Rx, -68dBm@65M 1Rx
802.11n HT40: -82dBm@13.5M 1Rx, -65dBm@135M 1Rx
(Added 3dBm@2Rx in average, ±2 dBm tolerance)
RF Sensitivity
(2nd Radio, 5G Band)
802.11a: -75dBm@54M 1Rx, -86dBm@6M 1Rx
802.11n/ac HT20: -67dBm@MCS8 1Rx, -90dBm@MCS0 1Rx
802.11n/ac HT40: -64dBm@MCS9 1Rx, -87dBm@MCS0 1Rx
802.11n/ac HT80: -60dBm@MCS9 1Rx, -84dBm@MCS0 1Rx
(Added 3dBm@2Rx in average, ±2 dBm tolerance)
Attached Antenna
Embedded Wall/Ceiling-mount 180° 2.4G 2T2R + 5G 2T2R bands antenna with a reflector plate. Radio Pattern 1/2: 2400-2500MHz Frequency, 9dBi peak gain
Radio Pattern 3/4: 5150-5350MHz: 10dBi peak gain, 5475-5874MHz: 8dBi peak gain VSWR: 2.5:1
Range from 150m ~300m depends on the location, check the manual for detail.
Transmission Rate
802.11a/g: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
802.11b: 1,2,5.5,11Mbps
802.11n: 6.5 to 300Mbps (Multiple Rates, depends on MCS Index and Ground Interval) 802.11ac: 6.5 to 866Mbps (Multiple Rates, depends on MCS Index and Ground Interval)
Management
 
Management
Web GUI, Telnet, SNMP, IP Setup, Management VLAN ID, Configuration Backup/Restore, Firmware Upgrade, Reload Default, Ping, SNTP, USB Storage
WLAN Setup
Operation Mode: Wireless AP/Client, WDS-AP/Client
Wireless Setting: Radio on/off, SSID Configuration, Security Settings, Output Power, Data Rate, Frequency/ Channel selection, Traffic Shapping, Maximum Client Number, WMM QoS Link Test: Site Survey, Antenna Alignment Tool, Data Rate Test
Wire/Wireless Integration
Ethernet Port and WLAN Link Fault Pass-Through Spanning Tree Protocol, Link Layer Discovery Protocol
Router/Gateway
Operating Mode: Bridge or Router mode for the Ethernet/Wireless Interface NAT, Hardware-based NAT Routing, DHCP Server/Client
SNMP
Simple Network Management Protocol v1/v2c/v3, SNMP Trap Function-based MIB (Same as other Korenix Wireless AP)
Status & Log
System Information, ARP Table, DHCP Client List, System Event Log
Controller-based AP
Controller-based management by Korenix IWLAN Controller
Utility/NMS
Support Korenix View Utility, Korenix NMS
Security
 
Secured Access
HTTPS, SSH, IEEE 802.1X, Radius Server
WLAN Security
Multiple SSID(up to 8x SSID), VLAN ID, SSID Broadcast
Security Encryption
WEP 64/128bits, WPA-PSK(TKIP), WPA2-PSK/EAP(TKIP, AES, IEEE 802.1x/Radius)
Firewall
Inbound/Outbound Firewall Setting, DMZ, Port forwarding
VPN
Open VPN, IPSec
Power Requirement
 
Power
JetWave 4020/4020E: Dual DC 24V input or Passive 24V PoE on GT1, Accepted Input Range:
±15%
JetWave 4020-HV: Dual DC 110V input, Accepted Input Range: ±15% (*Optional selection
by project, check with Korenix Sales.)
Power Consumption
Standby Mode: 4.4W/24V, 5.5W/110V (Power on only) Full Load: Max. 9.6W/24V, 8.8W/110V
Suggest to reserve 15% tolerance power in practical installation.
Mechanical
 
Enclosure
IP67
Aluminum Body + Plastic (SABIC) Cover
External Antenna
JetWave 4020: N.A. (Protected by cap.) JetWave 4020E: 4x N-Type Sockets
Vent
Vent for heat dispersing
Mounting
Pole-mount, Wall-mount or Ceiling Mount
*Equipped with Mounting kit in shipment
Dimension
236.8mm(H) x 266.8mm(D) x 91.5mm(W)
Weight
4Kg with package
Environmental
 
Operating Temperature
-40° ~ 70°C
Operating Humidity
5% ~ 95% (operating)
Storage Temperature
-40° ~ 85°C
Approvals
 
Certification
R&TTE:
CE EN55022/55024
EN 50121-1/EN50121-4:2006 +AC;2008 EN 301 489-1 V1.9.2/-17 V2.2.1(WLAN)
EN 301 893 V1.8.1 (5G 802.11ac WIFI and DFS) EN 300 328 V1.9.1(2.4G WIFI)
EN 62311:2008 (2412~2472MHz, 5180-5240MHz, 5500-5700MHz)
Safety EN60950-1
FCC Part 15 C/E (2.4G/5G) for FCC model
Warranty
3 years
Technology
 
Standard
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 10/100Base-TX,
IEEE 802.3ab for 1000BaseT
IEEE 802.11n/g Wireless LAN
IEEE 802.11ac Wave 1 Wireless LAN
IEEE 802.11i Wireless Security
Highest Data Rate:
2.4G IEEE 802.11n: 300Mbps @ 40MHz
5G IEEE 802.11ac: 866Mbps @ 80MHz
Interface
 
Ethernet Port
1x 10/100/1000Base-T(X) WAN
1x 10/100/1000Base-T(X) LAN
M12 X-code Connector
WIFI
IEEE802.11n 2.4G Band, 2T2R MIMO IEEE802.11ac 5G Band, 2T2R MIMO
USB + Console
USB + RS-232 Diagnostic Console, M12 A-code Connector
Power Input
2x 24VDC (±15%) Power Input, M12 A-code Connector
*2x 110V(±15%) by option
WIFI
 
Chipset
Qualcomm Atheros Processor and 802.11ac WIFI Chipset
Capability
5G IEEE 802.11ac Wave 1 + 2.4G IEEE 802.11n
5G: IEEE 802.11ac 2T2R MIMO, up to 866Mbps PHY Rate, 20-/40-/80-MHz Channels 2.4G: IEEE 802.11n 2T2R MIMO, up to 300Mbps PHY Rate, 20-/40-/80-MHz Channels Dual Radio Concurrent Design, up to 1.16Gbps PHY Rate
MIMO
5G: IEEE 801.11ac 2T2R MIMO
2.4G: IEEE 801.11n 2T2R MIMO
RF Modulation
802.11ac, 802.11g/n: OFDM (BPSK,QPSK,16-QAM,64QAM; 256QAM@11ac)
Operating Frequency
5GHz Typical Band: (802.11ac WIFI)
CE: 5.170~5.250GHz, 5.500~5.700GHz, Support Dynamic Frequency Selection (DFS)
FCC: 5.170~5.250GHz, 5.740~5.825GHz
(Programmable for other 5G Band)
2.4GHz Band: (802.11n WIFI)
2.412~2.472GHz
(Programmable for different country regulations)
RF Output Power
5.8GHz Band:
27dB EIRP for ETSI 301 893 (Band 3)
Certificated for use with up to 10dBi anntenna gain
2.4GHz Band:
20dB EIRP for CE (ETSI 300 328)
Certificated for use with up to 9dBi anntenna gain
(Controllable for different country regulations, check user manual for detail)
RF Sensitivity
(1st Radio, 2.4G Band)
802.11b: -86dBm@11M 1Rx
802.11g: -85dBm@6M 1Rx, -72dBm@54M 1Rx
802.11n HT20: -85dBm@6.5M 1Rx, -68dBm@65M 1Rx
802.11n HT40: -82dBm@13.5M 1Rx, -65dBm@135M 1Rx
(Added 3dBm@2Rx in average, ±2 dBm tolerance)
RF Sensitivity
(2nd Radio, 5G Band)
802.11a: -75dBm@54M 1Rx, -86dBm@6M 1Rx
802.11n/ac HT20: -67dBm@MCS8 1Rx, -90dBm@MCS0 1Rx
802.11n/ac HT40: -64dBm@MCS9 1Rx, -87dBm@MCS0 1Rx
802.11n/ac HT80: -60dBm@MCS9 1Rx, -84dBm@MCS0 1Rx
(Added 3dBm@2Rx in average, ±2 dBm tolerance)
Attached Antenna
Embedded Wall/Ceiling-mount 180° 2.4G 2T2R + 5G 2T2R bands antenna with a reflector plate. Radio Pattern 1/2: 2400-2500MHz Frequency, 9dBi peak gain
Radio Pattern 3/4: 5150-5350MHz: 10dBi peak gain, 5475-5874MHz: 8dBi peak gain VSWR: 2.5:1
Range from 150m ~300m depends on the location, check the manual for detail.
Transmission Rate
802.11a/g: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
802.11b: 1,2,5.5,11Mbps
802.11n: 6.5 to 300Mbps (Multiple Rates, depends on MCS Index and Ground Interval) 802.11ac: 6.5 to 866Mbps (Multiple Rates, depends on MCS Index and Ground Interval)
Management
 
Management
Web GUI, Telnet, SNMP, IP Setup, Management VLAN ID, Configuration Backup/Restore, Firmware Upgrade, Reload Default, Ping, SNTP, USB Storage
WLAN Setup
Operation Mode: Wireless AP/Client, WDS-AP/Client
Wireless Setting: Radio on/off, SSID Configuration, Security Settings, Output Power, Data Rate, Frequency/ Channel selection, Traffic Shapping, Maximum Client Number, WMM QoS Link Test: Site Survey, Antenna Alignment Tool, Data Rate Test
Wire/Wireless Integration
Ethernet Port and WLAN Link Fault Pass-Through Spanning Tree Protocol, Link Layer Discovery Protocol
Router/Gateway
Operating Mode: Bridge or Router mode for the Ethernet/Wireless Interface NAT, Hardware-based NAT Routing, DHCP Server/Client
SNMP
Simple Network Management Protocol v1/v2c/v3, SNMP Trap Function-based MIB (Same as other Korenix Wireless AP)
Status & Log
System Information, ARP Table, DHCP Client List, System Event Log
Controller-based AP
Controller-based management by Korenix IWLAN Controller
Utility/NMS
Support Korenix View Utility, Korenix NMS
Security
 
Secured Access
HTTPS, SSH, IEEE 802.1X, Radius Server
WLAN Security
Multiple SSID(up to 8x SSID), VLAN ID, SSID Broadcast
Security Encryption
WEP 64/128bits, WPA-PSK(TKIP), WPA2-PSK/EAP(TKIP, AES, IEEE 802.1x/Radius)
Firewall
Inbound/Outbound Firewall Setting, DMZ, Port forwarding
VPN
Open VPN, IPSec
Power Requirement
 
Power
JetWave 4020/4020E: Dual DC 24V input or Passive 24V PoE on GT1, Accepted Input Range:
±15%
JetWave 4020-HV: Dual DC 110V input, Accepted Input Range: ±15% (*Optional selection
by project, check with Korenix Sales.)
Power Consumption
Standby Mode: 4.4W/24V, 5.5W/110V (Power on only) Full Load: Max. 9.6W/24V, 8.8W/110V
Suggest to reserve 15% tolerance power in practical installation.
Mechanical
 
Enclosure
IP67
Aluminum Body + Plastic (SABIC) Cover
External Antenna
JetWave 4020: N.A. (Protected by cap.) JetWave 4020E: 4x N-Type Sockets
Vent
Vent for heat dispersing
Mounting
Pole-mount, Wall-mount or Ceiling Mount
*Equipped with Mounting kit in shipment
Dimension
236.8mm(H) x 266.8mm(D) x 91.5mm(W)
Weight
4Kg with package
Environmental
 
Operating Temperature
-40° ~ 70°C
Operating Humidity
5% ~ 95% (operating)
Storage Temperature
-40° ~ 85°C
Approvals
 
Certification
R&TTE:
CE EN55022/55024
EN 50121-1/EN50121-4:2006 +AC;2008 EN 301 489-1 V1.9.2/-17 V2.2.1(WLAN)
EN 301 893 V1.8.1 (5G 802.11ac WIFI and DFS) EN 300 328 V1.9.1(2.4G WIFI)
EN 62311:2008 (2412~2472MHz, 5180-5240MHz, 5500-5700MHz)
Safety EN60950-1
FCC Part 15 C/E (2.4G/5G) for FCC model
Warranty
3 years
Products specifications
Type Wi-Fi
Download
Products specifications
Type Wi-Fi