Key Features • GPS L1 Frequency C/A Code Receiver • NMEA Output and Input • SBAS (WAAS, EGNOS) Capable • aGPS Capable • Update Rate up to 10 Hz • PPS Timing Output • Multiple Form Factors and Interface Options
PERFORMANCE SPECIFICATIONS GPS performance statistics are clear view, stationary, autonomous (no aiding), 50% figures. Sensitivity based on signals measured at the antenna. Update Rate 1 Hz (default), up to 10 Hz Accuracy Position: 2 m Altitude: < 3 m PPS: ±25 ns Acquisition Re-Acquisition: < 2 s Hot Start: < 2 s Warm Start: 35 s Cold Start: 38 s Sensitivity Tracking: -160 dBm Acquisition: -146 dBm Dynamics Acceleration: 2 g Velocity: 515 m/s (COCOM Limit) ELECTRICAL INTERFACE CHARACTERISTICS Serial Interface UART: 2.8 V TTL level Protocol: NMEA Messages: GGA, GSA, GSV, RMC (default) Baud Rate: 9600, 8-N-1 PPS Interface Level: 2.8 V TTL level Pulse Width: Configurable 4 μs Main Power DC Levels: 3.0 V to 3.6 V Consumption: < 37 mA typical @ 20 °C Backup Power DC Levels: 2.0 to 3.6V Consumption: 5 μA typical @ 20 °C ENVIRONMENTAL SPECIFICATIONS Temperature Operating: -40 °C to + 85 °C Storage: -55 °C to +105 °C Humidity: 5% to 95% non-condensing @ 60 °C Vibration 5 Hz to 20 Hz: 0.008 g3/Hz 20 Hz to 100 Hz: 0.05 g3/Hz 100 Hz to 900 Hz: -3 dB/octave PHYSICAL CHARACTERISTICS Dimensions -C1011: 10 mm x 11 mm x 2.01 mm -C1919: 19 mm x 19 mm x 2.54 mm -C2626: 26.0 mm x 26.0 mm x 6.0 mm Connectors: -C1011: 36-ball surface-mount LGA -C1919: 28 surface-mount edge castellations -C2626: 8-pin interface header H.FL antenna connector ORDERING DETAILS
