Technology
|
|
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-TX IEEE 802.3z Gigabit Ethernet Fiber IEEE 802.3x Flow Control and back pressure IEEE 802.3af Power Over Ethernet (PoE) IEEE 802.3at Power Over Ethernet Plus (PoE Plus) IEEE 802.1p Class of Service IEEE 802.1Q VLAN IEEE 802.1P GMRP IEEE 802.1d Spanning Tree Protocol IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) IEEE802.3ad Link Aggregation Control Protocol (LACP) IEEE802.1x Port based Network Access Control IEEE802.1AB Link Layer Discovery Protocol IEEE1588 Precision Time Protocol
|
|
Performance
|
|
Store and Forward Technology, 12.8Gbps Switch Fabric.
|
|
|
14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100pps for Gigabit Ethernet
|
|
|
Typical: 64 bytes to 1546 bytes
|
|
|
|
|
|
|
|
|
End-Span wiring architecture, fully IEEE802.3af-2003 compliant, and support IEEE802.3at, including 2-event and LLDP classification
|
|
|
RX/V-(1, 2) and TX/V+(3, 6)
|
|
Management
|
|
Cisco-Like CLI, Telnet, Korenix NMS, Web, SSL, SSH, SNMP v1/v2c/v3, RMON
|
|
|
Link Layer Discovery Protocol for NMS automated topology discovery (ex. Korenix NMS)
|
|
|
|
|
MIB-II, Bridge MIB, Ethernet-like MIB, VLAN MIB, SNMP MIB, PoE MIB, LLDP MIB, RMON MIB, Trap MIB, and Private MIB
|
|
|
Network Time Protocol to synchronize time
|
|
|
Online Traffic Monitoring
|
|
|
Static Trunk and 802.3ad LACP , Up to 8 Trunk Group, 8 ports per trunk
|
|
|
Ingress filtering for Broadcast, Multicast, Unknown DA or All packets, step by 64kbps
|
|
|
IEEE802.1Q VLAN, GVRP. Up to 256 VLANs
|
|
|
8 priority queues per port, IEEE802.1p COS and Layer 3 TOS/DiffServ
|
|
|
IGMP Snooping v1/v2/v3 for multicast filtering and IGMP Query v1/v2
|
|
|
GARP Multicast Registration Protocol
|
|
IEEE1588 Precision Time Protocol (PTP)
|
|
Precision Time Protocol for precise time synchronization of networks
|
|
|
Assign authorized MAC to specific port
|
|
|
Port based Network Access Control
|
|
|
L2~L4 access control lists
|
|
|
Supports DHCP Client/Server & DHCP Option 82
|
|
|
Automatic warning by pre-defined events
|
|
|
Supports both Local mode and Server mode
|
|
Network Redundancy
|
Rapid Spanning Tree Protocol
|
|
IEEE802.1D-2004 RSTP. Compatible with STP.
|
|
Multiple Super Ring (MSRTM)
|
|
New generation Korenix Ring Redundancy Technology, including Rapid Super Ring, Rapid Dual Homing, TrunkRing, and MultiRing.
|
|
|
Provide failover time less than 10 ms and seamless restoration at full load
|
|
Rapid Dual Homing (RDHTM)
|
|
Multiple uplink paths to one or multiple upper switch
|
|
|
Increase the ring bandwidth and redundancy
|
|
|
Multiple ring connections. Up to 12 100Mbps rings and 2 Gbps rings in one JetNet 5728G.
|
|
|
Auto-detect Powered Device status for device auto-reset
|
|
|
Each PoE port can be activated and powered scheduling with different rules. Weekly schedule on hourly basis is supported
|
|
Advanced PoE Power Management
|
|
Individual port status monitoring, emergency power management, voltage/current monitoring and regulation
|
|
Interface
|
|
10/100Base-TX: 24 x RJ-45 with 16 PoE injector 10/100/1000Base-TX: 4 x RJ-45, combo with SFP 1000Base-X: 4 x SFP with Hot Swappable
|
|
|
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable (100m) 100 Base-TX: 2/4-pair UTP/STP Cat. 5 cable (100m) 1000 Base-T: 4-pair UTP/STP Cat. 5 cable (100m)
|
|
|
MSR status LED: 1. MSR in Normal State (Lit Green) 2. MSR in Abnormal State (Lit Amber) 3. MSR function not active (Not Lit) 4. Incorrect configuration of MSR, ex. ring not connected to ring port (Flashes Green) 5. The break has been detected to be local to one of the ports (Flashes Amber) PoE LED: 802.3af mode: Detection/Powering (Green) 802.3at mode: Detection/Powering (Blue) Port LED: 10/100 RJ-45: Link/Activity (Lit Green/Flashes Green) Gigabit Copper/SFP: Link/Activity (Lit Green/Flashes Green) Diagnostic LED: PSU/DC Power (Green), RDY (Green), Alarm (Red) RS232 Console: RJ-45 Connector, Pin3: TxD, Pin6: RxD, Pin5:GND
|
|
|
1 Standard 3-pronged AC plug + 4 pin DC Terminal Block
|
|
|
1 set of relay output with current carrying capability of 1A@24V
|
|
|
Power (PSU, DC1, DC2) failure, port failure, ping failure, login failure, RSR topology change
|
|
Power Requirements
|
Power Consumption w/o the PD loading
|
|
28 Watts Max PSU: 90-264VAC/127-370VDC, 300W DC1/DC2: 48VDC (46-57VDC), redundant dual inputs
|
|
PoE Power Output IEEE 802.3at
|
|
|
PoE Power Output IEEE 802.3af
|
|
|
|
Overload Current Protection: Present Reverse Polarity Protection: Present PoE Protection: over-temp, over-current, over/under-voltage & transient
|
|
Mechanical
|
|
|
|
IP31 protection, Metal case
|
|
|
43.8mm(H) x 431mm (W) x 375mm (D)
|
|
|
|
Environmental
|
|
|
|
5% to 95% (non-condensing)
|
|
|
|
|
1.5KV for ports and power
|
|
Regulatory Approvals
|
|
FCC Class A, CE/EN55022. Class A
|
|
|