Cerca
Filters
Close

Spiacenti, questo prodotto non é più disponibile

JetCon-3401G

Industrial Gigabit Ethernet Media Converter
Caratteristiche
  • Converts 10/100/1000TX to Gigabit Fiber
  • Flexible SFP Fiber transceiver design
  • Auto Link Loss Forwarding (LLF) for fault detection
  • Fault Alert for port and power
  • IEEE 802.1p QoS for data precedence transmission
  • Redundant DC 12~48V power inputs
  • Aluminum case with IP31 grade protection
  • Supports AC 1.5KV Hi-Pot isolation protection
  • Operating temperature -25°~70°C
Produttore:: Korenix Technology
Technology
Standard
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit Ethernet Fiber
IEEE802.3x Flow Control and Back-Pressure
IEEE802.1p Class of Service
IEEE802.1Q Quality of Service

Performance
Forwarding Technology
Store and Forward technology with 64 ~ 1536 bytes packet forwarding ability
System Throughput
1.49Mpps
Packet buffer
2.75Mbits
Link Loss Forwarding
Two-way loss-signature auto forwarding, configured by DIP switch
Event Alarm
Configurable relay alarm output for port or power events

Interface
Number of Ports
1 x 10/100/1000 Base-TX with Auto MDI/ MDI-X function, Auto-Negotiation 
1 x SFP socket with hot-swappable function for Gigabit Ethernet SFP Transceiver
Connector
10/100/1000 Base-TX: RJ-45 
SFP socket: support 3.3V Gigabit Ethernet 1.25Gbps Fiber Transceiver. 
Terminal block: 4-Pin for redundant power input; 2-Pin for alarm relay output
Cables
RJ-45 Connector: 4 pairs of Cat-5 UTP/STP cable with EIA/TIA 568B type conductor arrangement for 1000Base-T. Maximum link distance is 100 meters
Configuration DIP Switch
DIP 1: Port Event Alarm Enable/Disable
DIP 2: Power Event Alarm Enable/Disable
DIP 3: Link Loss Forwarding Enable/Disable
Core
RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The link distance is maximum 100 meters.
SC connector: supports multi-mode or single-mode optical fiber
Multi-mode fiber: 50/125um or 62.5/125um, max. distance 2KM
Single-mode fiber: 8/125um, 9/125um or 10/125 um, max. distance 30KM
Diagnostic LED
System: Power (Green) x2 ,Link Loss Forwarding (Red) x1, Alarm (Red) x1 
RJ-45 port: 
Speed (Green): On (1000Mbps Link), Blinking (100Mbps Link), Off (10Mbps Link or disconnect).
Link/Activity (Green): On (Link), Blinking (Activity)
Full Duplex/Collision (Yellow): On (link at full duplex mode), Blinking (Collision)
SFP port: 
Link/Activity (Green): On (Link), Blinking (Activity)
Full Duplex/Collision (Yellow):On (link at full duplex mode), Blinking (Collision)
 
Power Requirements
System Power
DC 24V (12~48V) with polarity reverse correction and over current protection
Power Consumption
8 Watts @ DC 24V(Maximum)
 
Mechanical
Installation
DIN-Rail mount
Case
Aluminum alloy metal case with grade 31 of ingress protection
Dimensions
120mm(H) x 55mm (W) x108 mm (D) ( with DIN rail clip)
 
Environmental
Operating Temperature
-25 ~ 70°C
Operating Humidity
0% ~ 95% (Non-condensing)
Storage Temperature
-40 ~ 80°C (-40 to 185°F)
Storage Humidity
0% ~ 95% (Non-condensing)
 
Regulatory Approvals
Hi-Pot
1.5KV on port to port and port to power
EMI
FCC Class A, EN55022
EMC
EN61000-4-2, EN61000-4-3, EN61000-4-4 , EN61000-4-5, EN61000-4-6, EN61000-4-8, EN610004-11
Shock
IEC 60068-2-27
Free Fall
IEC 60068-2-32
Vibration
IEC 60068-2-6
Technology
Standard
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit Ethernet Fiber
IEEE802.3x Flow Control and Back-Pressure
IEEE802.1p Class of Service
IEEE802.1Q Quality of Service

Performance
Forwarding Technology
Store and Forward technology with 64 ~ 1536 bytes packet forwarding ability
System Throughput
1.49Mpps
Packet buffer
2.75Mbits
Link Loss Forwarding
Two-way loss-signature auto forwarding, configured by DIP switch
Event Alarm
Configurable relay alarm output for port or power events

Interface
Number of Ports
1 x 10/100/1000 Base-TX with Auto MDI/ MDI-X function, Auto-Negotiation 
1 x SFP socket with hot-swappable function for Gigabit Ethernet SFP Transceiver
Connector
10/100/1000 Base-TX: RJ-45 
SFP socket: support 3.3V Gigabit Ethernet 1.25Gbps Fiber Transceiver. 
Terminal block: 4-Pin for redundant power input; 2-Pin for alarm relay output
Cables
RJ-45 Connector: 4 pairs of Cat-5 UTP/STP cable with EIA/TIA 568B type conductor arrangement for 1000Base-T. Maximum link distance is 100 meters
Configuration DIP Switch
DIP 1: Port Event Alarm Enable/Disable
DIP 2: Power Event Alarm Enable/Disable
DIP 3: Link Loss Forwarding Enable/Disable
Core
RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The link distance is maximum 100 meters.
SC connector: supports multi-mode or single-mode optical fiber
Multi-mode fiber: 50/125um or 62.5/125um, max. distance 2KM
Single-mode fiber: 8/125um, 9/125um or 10/125 um, max. distance 30KM
Diagnostic LED
System: Power (Green) x2 ,Link Loss Forwarding (Red) x1, Alarm (Red) x1 
RJ-45 port: 
Speed (Green): On (1000Mbps Link), Blinking (100Mbps Link), Off (10Mbps Link or disconnect).
Link/Activity (Green): On (Link), Blinking (Activity)
Full Duplex/Collision (Yellow): On (link at full duplex mode), Blinking (Collision)
SFP port: 
Link/Activity (Green): On (Link), Blinking (Activity)
Full Duplex/Collision (Yellow):On (link at full duplex mode), Blinking (Collision)
 
Power Requirements
System Power
DC 24V (12~48V) with polarity reverse correction and over current protection
Power Consumption
8 Watts @ DC 24V(Maximum)
 
Mechanical
Installation
DIN-Rail mount
Case
Aluminum alloy metal case with grade 31 of ingress protection
Dimensions
120mm(H) x 55mm (W) x108 mm (D) ( with DIN rail clip)
 
Environmental
Operating Temperature
-25 ~ 70°C
Operating Humidity
0% ~ 95% (Non-condensing)
Storage Temperature
-40 ~ 80°C (-40 to 185°F)
Storage Humidity
0% ~ 95% (Non-condensing)
 
Regulatory Approvals
Hi-Pot
1.5KV on port to port and port to power
EMI
FCC Class A, EN55022
EMC
EN61000-4-2, EN61000-4-3, EN61000-4-4 , EN61000-4-5, EN61000-4-6, EN61000-4-8, EN610004-11
Shock
IEC 60068-2-27
Free Fall
IEC 60068-2-32
Vibration
IEC 60068-2-6